|
MCOTS-C-28-48-HP Datasheet, PDF (1/13 Pages) SynQor Worldwide Headquarters – MILITARY COTS DC/DC CONVERTER | |||
|
MCOTS-C-28-48-HP
Single Output
Half Brick
MILITARY COTS DC/DC CONVERTER
16-40V
16-50V
48V
4A
92% @ 2A / 90% @ 4A
Continuous Input Transient Input
Output
Output
Efficiency
Full Power Operation: -55°C to +100°C
The MilQor series of MIL-COTS DC/DC converters brings
SynQorâs field proven high-efficiency synchronous
rectification technology to the Military/Aerospace
industry. SynQorâs ruggedized encased packaging
approach ensures survivability in demanding
environments. Compatible with the industry standard
format, these converters operate at a fixed frequency,
and follow conservative component derating guidelines.
They are designed and manufactured to comply with a
wide range of military standards
Mil-COTS
Operational Features
Designed and Manufactured in the USA
⢠High efficiency, 90% at full rated load current
⢠Operating input voltage range: 16-40 V
⢠Fixed frequency switching provides predictable EMI
⢠No minimum load requirement
Mechanical Features
⢠Industry standard half-brick pin-out configuration
⢠Size: 2.49" x 2.39" x 0.512"
(63.14mm x 60.6mm x 13mm)
⢠Total weight: 5 oz (142 g)
Protection Features
⢠Input under-voltage lockout
⢠Output current limit and short circuit protection
⢠Active back bias limit
⢠Output over-voltage protection
⢠Thermal shutdown
Control Features
⢠On/Off control referenced to input side
⢠Remote sense for the output voltage
⢠Output voltage trim range of -20%, +10%
Safety Features
⢠2250 V, 30 MW input-to-output isolation
⢠Certified 60950-1 requirements for basic insulation
(see Standards and Qualifications page)
⢠CE Marked
⢠RoHS compliant
Product # MCOTS-C-28-48-HP Phone 1-888-567-9596
Screening/Qualification
⢠AS9100 and ISO 9100:2000 certified facility
⢠Qualification consistent with MIL-STD-883
⢠Avialable with standard or military grade screening
⢠Pre-cap inspection per IPC-610, Class III
⢠Temperature cycling per MIL-STD-883, Method 1010,
Condition B, 10 cycles
⢠Burn-In at 100°C baseplate temperature
⢠Final visual inspection per MIL-STD-2008
⢠Full component traceability
www.synqor.com
Doc.# 005-0005281 Rev. 1
06/16/09
Page 1
|
▷ |