|
IQ65033QMA10 Datasheet, PDF (1/15 Pages) SynQor Worldwide Headquarters – Quarter-Brick ATCA Power Interface Module | |||
|
36-75V @ 10 A
Input/Output
3.3 V & 5.0 V
MGMT Power
The IQ65033QMA10 iQor⢠Power Interface Module
integrates all features required by the AdvancedTCA
Base Specification into a Quarter-Brick footprint. The
iQor offers industry leading external hold-up capacitor
volumetric density for a compact overall solution. At
a 90V holdâup capacitor voltage (trimmable 50-95 V),
only 564 µF is required to achieve 8.70ms holdâup time
at 200Win. The -48 V output voltage is conditioned for
smooth operation through severe input transient events.
The iQor is designed thermally and electrically to drive
high power wide-range-input DC/DC converters such as
the 300 W SynQor PQ60120QEA25. RoHS Compliant see
last page.
Technical
Specification
IQ65033QMA10
Quarter-Brick ATCA
Power Interface Module
Operational Features
⢠Input ORing for A & B power feeds (MOSFET-based for
low power dissipation)
⢠Hot swap control with seamless ride-through of input
voltage transient
⢠EMI filter meets CISPR 22 Class B when used as directed
(see applications section)
⢠External hold-up capacitor trimmable from 50-95 V
⢠Automatic discharge of external hold-up capacitor
⢠Isolated management power of 3.3 V at 3.6 A and 5.0 V
at 150 mA
⢠Dual input side enable
⢠I2C interface data reporting (optional)
IQ65033QMA10 Module
Protection Features
⢠Management power over-voltage protection
⢠Management power over-current protection
⢠Main output over-current protection
⢠Thermal shutdown protects the unit from abnormal
environmental conditions
⢠Input fuse/feed loss alarm
Mechanical Features
⢠Industry standard quarter-brick size: 1.45" x 2.3"
(36.8x58.4 mm)
⢠Overall height of 0.54" (13.7 mm), permits better airflow
and smaller card pitch
⢠Total weight: 1.2 oz (34 g)
⢠Flanged pins designed to permit surface mount soldering
(avoid wave solder) using FPiP technique
⢠External hold-up capacitor footprint much smaller than
other solutions currently available on the market
Safety Features
⢠2250V, 30 M⦠VRTN_A/B to LOGIC_GND and
SHELF_GND isolation
⢠UL/cUL 60950-1 recognized (US &âCanada), basic
insulation rating
⢠TUV certified to EN60950-1
⢠Meets 72/23/EEC and 93/68/EEC directives which
facilitates CE Marking in userâs end product
⢠Board and plastic components meet UL94V-0
flammability requirements
Product # IQ65033QMA10
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-IQ5033S Rev. G
05/04/09
Page 1
|
▷ |