|
BQ55120ETL16 Datasheet, PDF (1/13 Pages) SynQor Worldwide Headquarters – Eighth-brick DC Bus Converter | |||
|
Technical
Specification
BQ55120ETL16
35-55V 12V 192Watt 2000Vdc Eighth-brick
Input
Output
Power
Isolation DC Bus Converter
The BusQor⢠BQ55120ETL16 bus converter is a next-gener-
ation, board-mountable, isolated, fixed switching frequency
dc/dc converter that uses synchronous rectification to achieve
extremely high conversion efficiency. The power dissipated by
the converter is so low that a heatsink is not required, which
saves cost, weight, height, and application effort. The BusQor
series provides an isolated step down voltage from 35-55V to
a 12V intermediate bus with no regulation in a standard
âeighth-brickâ module. BusQor converters are ideal for creat-
ing the mid-bus voltage required to drive point-of-load (non-iso-
lated) converters in intermediate bus architectures. RoHS com-
pliant (see page 12).
Bus
Converter
Operational Features
⢠Ultra-high efficiency, >95% at full rated load current
⢠Delivers up to 16 amps of output current (192W) with
minimal derating - no heatsink required
⢠Input voltage range: 35V â 55V provides 12V bus for
distributed power architectures
⢠Fixed frequency switching provides predictable EMI per-
formance
Mechanical Features
⢠Industry standard eighth-brick bus converter pin-out
⢠Industry standard size: 0.90â x 2.3â (22.9x58.4mm)
⢠Total height only 0.320â (8.13mm), permits better air-
flow and smaller card pitch
⢠Total weight: 0.7 oz. (20 grams)
⢠Flanged pins designed to permit surface mount solder-
ing (avoid wave solder) using FPiP technique
Control Features
⢠On/Off control referenced to input side (positive and
negative logic options available)
BQ55120ETL16 Module
Protection Features
⢠Input under-voltage lockout and over-voltage shutdown
protects against abnormal input voltages
⢠Output current limit and short circuit protection
⢠Thermal shutdown
Safety Features
⢠2000V, 30 M⦠input-to-output isolation
⢠UL/cUL 60950 recognized (US & Canada), basic insu-
lation rating
⢠TUV certified to EN60950
⢠Meets 72/23/EEC and 93/68/EEC directives
⢠Meets UL94V-0 flammability requirements
Product # BQ55120ETL16
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-2BE552B Rev. A
03/16/06
Page 1
|
▷ |