OXO100-1-349 Datasheet, PDF (1/2 Pages) SYNERGY MICROWAVE CORPORATION – OVEN CONTROLLED crystal OSCILLATOR

oven CONTROLLED crystal OSCILLATOR
plug-in MODEL: OXO100-1-349
FEATURES:
► Exceptionally Low Phase Noise
► Fast Warm-up Time
► Low Power Consumption
► Tight Frequency Stability
► Excellent Long-Term Stability
► El. Frequency Tuning Input
► Reference Voltage Output
► Small CO-8 package
SPECIFICATIONS
Nominal Frequency F_N
Initial Frequency Tolerance
T_A = +25 °C, after power on for 30 min.
Frequency Stability
Within operating range
vs. supply voltage changes V_S ± 5%
vs. load changes 50 Ohm ± 5%
Aging (after 30 days of continuous operation)
Per day
Per Year
15 Years
Frequency Tuning Range
Tuning Voltage Range V_C
Reference Voltage Output V_REF
Supply Voltage V_S
Supply Current I_S
Steady State @ +25 ºC
During Warm-up
Warm Up Time
To dF/F₀ < ± 1 x 10^-7 referred to F₀ after 1 hour
Output signal type
Initial output level
Output load impedance:
Harmonics:
Spurious (100 Hz to 5 MHz)
Typical Phase Noise
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
Temperature Ranges
Operating
Storage
100.000 MHz
≤ ± 2 x 10^-7
≤ ± 5 x 10^-8
≤ ± 1 x 10^-8
≤ ± 5 x 10^-9
≤ ± 2 x 10^-9
≤ ± 1 x 10^-7
≤ ± 7 x 10^-7
≥ ± 1.5 ppm
0 to 10 V
+10 V ± 5%
+12.0 V ± 5%
≤ 150 mA
≤ 400 mA
≤ 5 min.
Sine wave
≥ 7 dBm
50 Ohm ± 10%
≤ -30 dBc
≤ -100 dBc
≤ -100 dBc/Hz
≤ -130 dBc/Hz
≤ -153 dBc/Hz
≤ -165 dBc/Hz
≤ -170 dBc/Hz
-20 °C ... +70 °C
-40 °C ... +85 °C
Package #
349
Control
Voltage In V_C
1
Port Configuration
Reference
Voltage V_REF
2
Supply
Voltage V_s
3
RF
Output
4
GND.,
Case
5
Copyright © 2008 Synergy Microwave Corporation
201 McLean Boulevard • Paterson, New Jersey 07504 • Tel: [phone] • Fax: [phone]
E-Mail: [e-mail] • World Wide Web: http://www.synergymwave.com