OXO10-1-348 Datasheet, PDF (1/2 Pages) SYNERGY MICROWAVE CORPORATION – OVEN CONTROLLED crystal OSCILLATOR

oven CONTROLLED crystal OSCILLATOR
surface mount MODEL: OXO10-1-348
FEATURES:
► Exceptionally Low Phase Noise
► Fast Warm-up Time
► Low Power Consumption
► Tight Frequency Stability
► Excellent Long-Term Stability
► El. Frequency Tuning Input
► Reference Voltage Output
► Small SMD package
SPECIFICATIONS
Nominal Frequency F_N
Frequency Stability
Within operating range
vs. supply voltage changes V_S ± 5%
vs. load changes 50 Ohm ± 5%
Aging (after 30 days of continuous operation)
Per day
Per month
15 Years
Frequency Tuning Range
Tuning Voltage Range V_C
Reference Voltage Output V_REF
Supply Voltage V_S
Supply Current I_S
Steady State @ +25 ºC
During Warm-up
Warm Up Time
To dF/F₀ < ± 5 x 10^-8 referred to F₀ after 1 hour
Output signal type
Initial output level
Output load impedance:
Harmonics:
Spurious ( 100 Hz to 1 MHz from carrier )
Typical Phase Noise
1 Hz
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
Temperature Ranges
Operating
Storage
10.000 MHz
≤ ± 5 x 10^-9
≤ ± 5 x 10^-10
≤ ± 5 x 10^-10
Package #
348
≤ ± 5 x 10^-10
≤ ± 5 x 10^-9
≤ ±5 x 10^-7
±0.5 ppm to ±1.5 ppm
0 to 5 V
+5 V ± 1.5%
+12.0 V ± 5%
≤ 200 mA
≤ 350 mA
≤ 10 min
Sine wave
+ 7.5 dBm ± 2.5 dBm
50 Ohm
≤ -20 dBc
≤ -90 dBc
≤ -100 dBc/Hz
≤ -130 dBc/Hz
≤ -150 dBc/Hz
≤ -160 dBc/Hz
≤ -165 dBc/Hz
≤ -170 dBc/Hz
-20 °C ... +70 °C
-40 °C ... +80 °C
RF
Oven
Output Alarm Out
1
2
Port Configuration
GND.,
Case
V_REF
Out
V_ADJ.
In
3
4
5
Osc
Enable In
V_S
6
7
Copyright © 2008 Synergy Microwave Corporation
201 McLean Boulevard • Paterson, New Jersey 07504 • Tel: [phone] • Fax: [phone]
E-Mail: [e-mail] • World Wide Web: http://www.synergymwave.com