LFSW35105-100 Datasheet, PDF (1/7 Pages) SYNERGY MICROWAVE CORPORATION – INTELLIGENT INTERACTIVE SYNTHESIZER

INTELLIGENT INTERACTIVE SYNTHESIZER
SURFACE MOUNT MODEL: LFSW35105-100
WIDE BANDWIDTH
350 - 1050 MHz
FEATURES:
► Exceptionally Low Phase Noise
► Interactive Communication
► Standard Programming Interface
► Ultra Wide Tuning Range
► Lead Free - RoHS Compliant
► Patent Pending REL-PRO^® Technology
► Small Size, Surface Mount
► Buffered Output
Phase Noise
-40
-50
-60
-70
-80
-90
-100
-110
-120
-130
-140
-150
-160
-170
100
1000
10000
100000
Offset Frequency (Hz)
1000000
10000000
350.000 MHz / 15.2 dBm 700.000 MHz / 14.8 dBm 1050.00 MHz / 11.5 dBm
SPECIFICATIONS (Rev. F 08/07/07)
Frequency
350 - 1050 MHz
Step Size
Reference
Input Frequency
Reference
Input Voltage
1000 kHz
10 MHz*
1 V p-p to 3.3 V p-p
Bias Voltage
Vcc
Digital
VCO
Converter
Analog
V (Vdc)
+5
+5
+5
+5
I (mA Max.)
65
50
65
5
Output Power
+10 dBm (Min.)
Spurious Suppression
85 dB (Typ.)
Harmonic Suppression
20 dB (Typ.)
Settling Time
10 mSec (Typ.)**
Output Impedance
50 Ohms
Typical Phase Noise
Offset
@ 1 kHz
@ 10 kHz
@ 100 kHz
Phase Noise
-100 dbc/Hz
-102 dbc/Hz
-132 dbc/Hz
Operating
Temperature Range
-30 to +75 °C
Programming
See Application Note: AN7100
* Reference input frequency is programmable in multiples of the step size, 10 MHz
is the default setting with 150 MHz (Max.).
** From the rising edge of LE to stable lock detect.
Absolute Maximum Ratings
Storage Temp. Range
Bias Voltage (Digital)
Bias Voltage (VCO)
Bias Voltage (Converter)
Bias Voltage (Analog)
DC Voltage Applied to RF Out
-55 to +125 ºC
+5.25 V
+5.5 V
+8 V
+5.25 V
±25 V
Package #
280LF
Pin 6 - RF Out
Pin 8 - Ref In
Pin 9 - Vcc(VCO) ****
Pin 10 - Vcc(Converter) ****
Pin 12 - Lock Detect Out*
Pin 14 - Vcc(Tune) ***
Pin 16 - Vout(Converter) ***
Pin-Out
Pin 25 - Latch Enable In
Pin 26 - Data In
Pin 27 - Error Flag
Pin 28 - Clock In
Pin 29 - Reset **
Pin 34 - Vcc(Digital) ****
Pin 36 - Vtune
Pin 38 - Vcc(Analog) ****
Pin 19-22, 24, 30-33 - NC
All Others Ground
NC - No Connection
* High when locked (source/sink 500 uA)
** A low on this input will reset the internal controller. Leave unconnected for
normal operation.
*** Connect pins 14 and 16 together externally and add 10uF tantalum bypass
capacitor to ground.
**** Supply external filtering for pin 9, 10, 34 and 38