LFSW170225-1M Datasheet, PDF (1/7 Pages) SYNERGY MICROWAVE CORPORATION – INTELLIGENT INTERACTIVE SYNTHESIZER

INTELLIGENT INTERACTIVE SYNTHESIZER
SURFACE MOUNT MODEL: LFSW170225-1M
optimized bandwidth
1700 - 2250 MHz
FEATURES:
► Exceptionally Low Phase Noise
► Interactive Communication
► Standard Programming Interface
► Ultra Wide Tuning Range
► Lead Free - RoHS Compliant
► Patent Pending REL-PRO^® Technology
► Small Size, Surface Mount
► Buffered Output
Phase Noise
-80
-90
-100
-110
-120
-130
-140
-150
-160
-170
100
1000
1700.00 MHz
10000
100000
Offset Frequency (Hz)
1980.00 MHz
1000000
10000000
2250.00 MHz
SPECIFICATIONS (Rev. B 02/16/09)
Frequency
Step Size
Reference Input Frequency
Reference Input Voltage
1700 - 2250 MHz
10 MHz
100 MHz *
1 V p-p to 3.3 V p-p
Bias Voltage
Vcc
Digital
VCO
Converter
V (Vdc)
+5
+10
+5
I (mA Max.)
50
40
60
Output Power
Spurious Suppression
Harmonic Suppression
Settling Time
Output Impedance
+7 dBm (Min.)
75 dB (Typ.)
25 dB (Typ.)
10 mSec (Typ.) **
50 Ohms (Nom.)
Typical Phase Noise
Offset
@ 1 kHz
@ 10 kHz
@ 100 kHz
Phase Noise
-102 dbc/Hz
-102 dbc/Hz
-123 dbc/Hz
Operating Temperature Range -40 to +85 °C
Programming
See Application Note: AN7100
* Reference input frequency is programmable in multiples of the step size,
10 MHz is the default setting. 150 MHz (Max.)
** From the rising edge of LE to stable lock detect
Absolute Maximum Ratings
Storage Temp. Range
Bias Voltage (Digital)
Bias Voltage (VCO)
Bias Voltage (Converter)
DC Voltage Applied to RF Out
-55 to +125 ºC
+5.25 V
+5.5 V
+8.0 V
±25 V
Package #
197LF
Pin 5 - RF out
Pin 7 - Lock Detect Out *
Pin 9 - Data In
Pin 10 - Error Flag
Pin 11 - Clock In
Pin 13 - VCO (On/Off)****
Pin 16 - Reset **
Port Configuration
Pin 19 - Latch Enable In
Pin 21 - Ref. In
Pin 23 - Vcc (Digital)
Pin 24 - Vtune (Output)
Pin 25 - Vcc (VCO)
Pin 26 - Vout (Converter) ***
Pin 27 - Vcc (Tune) ***
Pin 28 - Vcc (Converter)
Pin 8,12,14,15,17 - NC
All Others - Ground
NC - No Connection
* High when locked (source/sink 500 uA)
** A low on this input will reset the internal controller. Leave unconnected for
normal operation.
*** Connect externally. Bypassed with a 10uF 35V tantalum capacitor.
**** NC if unused.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
This product is manufactured under one or more of the following patents: Approved: 5,160,810; 5,122,621; 5,390,349; 5,416,449; 5,650,754;
5,805,431; 6,525,623; 6,850,575; 7,088,189; 7,180,381; 7,196,591; 7,262,670; 7,265,642,7,292,113
Pending: 60/493075; 60/501371 & 60/501790; 60/527957 & 60/528670; 60/563481; 60/564173; 60/589090; 60/601823; 60/605791; EV31369834;
11/259766; 60/622485 & 60/710310; 10/937525/60/736901; 60/732787
Copyright © 2008 Synergy Microwave Corporation
201 McLean Boulevard • Paterson, New Jersey 07504 • Tel: [phone] • Fax: [phone]
E-Mail: [e-mail] • World Wide Web: http://www.synergymwave.com