LFSW110250-50 Datasheet, PDF (1/7 Pages) SYNERGY MICROWAVE CORPORATION – INTELLIGENT INTERACTIVE SYNTHESIZER

INTELLIGENT INTERACTIVE SYNTHESIZER
SURFACE MOUNT MODEL: LFSW110250-50
wide bandwidth
1100 - 2500 MHz
FEATURES:
► Exceptionally Low Phase Noise
► Interactive Communication
► Standard Programming Interface
► Ultra Wide Tuning Range
► Lead Free - RoHS Compliant
► Patent Pending REL-PRO^® Technology
► Small Size, Surface Mount
► Buffered Output
Phase Noise
-80
-90
-100
-110
-120
-130
-140
-150
-160
100
1000
1100.00 MHz / 11.4 dBm
10000
100000
1000000
Offset Frequency (Hz)
1800.00 MHz / 10.2 dBm 2500.00 MHz / 7.02 dBm
10000000
SPECIFICATIONS (Rev. C 12/09/08)
Frequency
Step Size
Reference Input Frequency
Reference Input Voltage
1100 - 2500 MHz
500 kHz
10 MHz *
1 V p-p to 3.3 V p-p
Bias Voltage
Vcc
Digital
VCO
Converter
V (Vdc)
+5
+5
+5
I (mA Max.)
50
35
60
Output Power
Spurious Suppression
Harmonic Suppression
Settling Time
Output Impedance
+5 dBm (Min.)
75 dB (Typ.)
15 dB (Typ.)
20 mSec (Typ.) **
50 Ohms (Nom.)
Typical Phase Noise
Offset
@ 1 kHz
@ 10 kHz
@ 100 kHz
Phase Noise
-90 dbc/Hz
-92 dbc/Hz
-115 dbc/Hz
Operating Temperature Range -40 to +85 °C
Programming
See Application Note: AN7100
* Reference input frequency is programmable in multiples of the step size,
10 MHz is the default setting. 150 MHz (Max.)
** From the rising edge of LE to stable lock detect
Package #
197LF
Absolute Maximum Ratings
Storage Temp. Range
-55 to +125 ºC
Bias Voltage (Digital)
+5.25 V
Bias Voltage (VCO)
Bias Voltage (Converter)
DC Voltage Applied to RF Out
+5.5 V
+8 V
±25 V
Pin 5 - RF out
Pin 7 - Lock Detect Out *
Pin 9 - Data In
Pin 10 - Error Flag
Pin 11 - Clock In
Pin 13 - VCO (On/Off)****
Pin 16 - Reset **
Pin-Out
Pin 19 - Latch Enable In
Pin 21 - Ref. In
Pin 23 - Vcc (Digital)
Pin 24 - Vtune (Output)
Pin 25 - Vcc (VCO)
Pin 26 - Vout (Converter) ***
Pin 27 - Vcc (Tune) ***
Pin 28 - Vcc (Converter)
Pin 8,12,14,15,17 - NC
All Others - Ground
NC - No Connection
* High when locked (source/sink 500 uA)
** A low on this input will reset the internal controller. Leave unconnected for
normal operation.
*** Connect externally. Bypassed with a 10uF 35V tantalum capacitor.
**** NC if unused.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
This product is manufactured under one or more of the following patents: Approved: 5,160,810; 5,122,621; 5,390,349; 5,416,449; 5,650,754;
5,805,431; 6,525,623; 6,850,575; 7,088,189; 7,180,381; 7,196,591; 7,262,670; 7,265,642,7,292,113
Pending: 60/493075; 60/501371 & 60/501790; 60/527957 & 60/528670; 60/563481; 60/564173; 60/589090; 60/601823; 60/605791; EV31369834;
11/259766; 60/622485 & 60/710310; 10/937525/60/736901; 60/732787
Copyright © 2008 Synergy Microwave Corporation
201 McLean Boulevard • Paterson, New Jersey 07504 • Tel: [phone] • Fax: [phone]
E-Mail: [e-mail] • World Wide Web: http://www.synergymwave.com