FSW80150-10 Datasheet, PDF (1/7 Pages) SYNERGY MICROWAVE CORPORATION – INTELLIGENT INTERACTIVE SYNTHESIZER

INTELLIGENT INTERACTIVE SYNTHESIZER
SURFACE MOUNT MODEL: FSW80150-10
wide bandwidth
800 - 1500 MHz
FEATURES:
► Exceptionally Low Phase Noise
► Interactive Communication
► Standard Programming Interface
► Ultra Wide Tuning Range
► Lead Free - RoHS Compliant
► Patent Pending REL-PRO^® Technology
► Small Size, Surface Mount
► Buffered Output
Phase Noise
-60
-70
-80
-90
-100
-110
-120
-130
-140
-150
-160
100
1000
800.000 MHz / 8.36 dBm
1400.00 MHz / 7.95 dBm
10000
100000
Offset Frequency (Hz)
950.000 MHz / 8.29 dBm
1500.00 MHz / 7.82 dBm
1000000
10000000
1050.00 MHz / 8.49 dBm
SPECIFICATIONS (Rev. B 06/02/08)
Frequency
Step Size
Reference
Input Frequency
Reference
Input Voltage
800 - 1500 MHz
100 kHz
10 MHz *
1.0 V p-p to 3.3 V p-p
Bias Voltage
Vcc
Digital
VCO
Tune
V (Vdc)
+5
+5
+15
I (mA Max.)
15
55
10
Output Power
Spurious Suppression
Harmonic Suppression
Settling Time
Output Impedance
+5 dBm (Min.)
70 dB (Typ.)
15 dB (Typ.)
20 mSec (Max.) **
50 Ohms (Nom.)
Typical Phase Noise
Offset
@ 1 kHz
@ 10 kHz
@ 100 kHz
Phase Noise
-75 dbc/Hz
-92 dbc/Hz
-118 dbc/Hz
Operating
Temperature Range
-40 to +85 °C
Programming
See Application Note: AN7100
* Reference input frequency is programmable in multiples of the step size,
10 MHz is the default setting. 150 MHz (Max.)
** From the rising edge of LE to stable lock detect
Absolute Maximum Ratings
Storage Temp. Range
Bias Voltage (Digital)
Bias Voltage (Tune)
Bias Voltage (VCO)
DC Voltage Applied to RF Out
-55 to +125 ºC
+5.25 V
+17 V
+5.5 V
±25 V
Package #
273LF
Pin 1 - Reset **
Pin 2,3 - NC
Pin 4 - Error flag
Pin 5 - Latch Enable In
Pin 6 - Ref. In
Pin-Out
Pin 7 - Vcc (Digital)
Pin 8 - Vcc (Tune)
Pin 9 - Vcc (VCO)
Pin 13 - RF Out
Pin 14 - Lock Detect Out *
Pin 15 - Data In
Pin 16 - Clock In
All Others - Ground
NC - No Connection
* High when locked (source/sink 500 uA)
** A low on this input will reset the internal controller. Leave unconnected for
normal operation.