DRO100 Datasheet, PDF (1/4 Pages) SYNERGY MICROWAVE CORPORATION – DIELECTRIC RESONATOR OSCILLATOR

DIELECTRIC RESONATOR OSCILLATOR
CONNECTORIZED MODEL: DRO100
FREQUENCY
10 GHz
FEATURES:
► Exceptional Phase Noise Performance
► Lead Free RoHS Compliant
Phase Noise
-60
-70
-80
-90
-100
-110
-120
-130
-140
-150
-160
-170
-180
1000
10000
100000
1000000
Offset Frequency (Hz)
10000000
SPECIFICATIONS (Rev. D 06/18/14)
Frequency
Tuning Voltage
Bias Voltage
Output Power
Tuning Sensitivity
Thermal Drift
Output Impedance
Harmonic Suppression
Tuning Port Capacitance
Modulation Bandwidth
10 GHz
1 - 15 VDC
+7 - 10 VDC @ 70 mA (Max.)
+8 dBm (Min.)
0.4 MHz/V (Typ.)
2 ppm / °C (Typ.)
50 Ohms (Nom.)
40 dBc (Typ.)
1 nF (Typ.)
20 MHz (Typ.)
Package #
391
0.33 5
0.137
0.531
0.866
1.063
2.79 5
Ø0 , 1 2 5
0.984
1.54 0
3.11 0
2.325
0.27 5
Phase Noise
Offset
dBc/Hz (Typ.)
1 kHz
-81
10 kHz
-111
100 kHz
-137
0.079
1 MHz
-158
10 MHz
-166
1.102
0.772
1.32 0
0.787
Jitter
Operating Temperature Range
Absolute Maximum Ratings
35 fs (@ 1 kHz to 30 MHz) (Typ.)
-15 to +75 °C
Pin 1 - RF Output
Pin 2 - GND
Pin 4 - Tuning Voltage V_T
Port Configuration
Pin 5 - Supply Voltage V_S
Pin 3 - V Temperature
Storage Temp. Range
Bias Voltage
Tuning Voltage
DC Voltage Applied to RF Out
-30 to +85 ºC
+10.5 V
+16.0 V
±25 V
Notes:
1. Access to the tuning screw is underneath the label. Tuning screws are factory
locked for optimum performance at the center frequency. Tuning of the mechanical
screw can cause significant shifts in frequency and adversely affect overall perfor-
mance. Warranty is void if seal over tuning screw is damaged.
2. Test data mesured with bias voltage at +8V.
3. Specifications guaranteed at 10 GHz.
Copyright © Synergy Microwave Corporation
201 McLean Boulevard • Paterson, New Jersey 07504 USA
Tel: [phone] • Fax: [phone]
E-Mail: [e-mail] • Website: http://www.synergymwave.com
Patents : http://www.synergymwave.com/patents
[ 1 of 4 ]