SP6016E Datasheet, PDF (1/8 Pages) SYNC POWER Crop. – Synchronous Rectifier Driver

SP6016E
Synchronous Rectifier Driver
DESCRIPTION
The fundamental of SP6016E synchronous
rectifier (SR) driver IC is based on our U.S.
patented methods that utilize the principle of
“prediction” logic circuit. The IC deliberates
previous cycle timing to control the SR in
present cycle by “predictive” algorithm that
makes adjustments to the turn-off time, in order
to achieve maximum efficiency and avoid
cross-conduction at the same time. Specially,
SP6016E is designed for Resonance. It also
maintains the MOSFET’s body diode conduction
at minimum level. The SP6016E is capable to
adapt in almost all existing Resonance
converters with few adjustments considered
necessary.
APPLICATIONS
 Switching Mode Power Supply
(CCM&DCM&QR)
 Storage area network power supplies
 Telecommunication converters
 Embedded systems
 Industrial & commercial systems using high
current processors
 Power converters to meet Lot 6 requirement
FEATURES
 Offers efficiency improvement over Schottky
Diode (depends on drive configuration of the
SR).
PIN CONFIGURATION (SOT-23-6L)
 Low Standby Power to meet DOE Lot 6
requirement.
 Drives all logic level Power MOSFET.
 Prediction gate timing control.
 Minimum MOSFET body diode conduction.
 Operating frequency up to 300 KHz.
PART MARKING
 Synchronize to transformer secondary
voltage waveform.
 Internal over voltage protection
2016/04/11 Ver1.0
Page 1