TTEZNH10PE90T Datasheet, PDF (1/3 Pages) Switchcraft, Inc. – EZ NORM JACK

2 ^{NPB 555 EZ Norm Series}
The EZ Norm offers a simplified method for setting up and changing normals to a Bantam /
TT patchbay. Simply remove the middle designation strip, and rotate the center cam, using a
standard screwdriver. An audible “click” can be heard as you rotate from full normals to no
normals to half normals. An opaque marking strip is included to conceal the normal positions,
if needed.
EZ NORM JACK SPECIFICATIONS
MATERIALS:
Housing & Cover: 94V-0 rated thermoplastic
Sleeve Collar: Nickel plated copper alloy
Tip, Ring, Shunt, & Sleeve Springs: Nickel Silver
with welded contacts
Welded Contacts: Gold
Cam Switching Springs: Silver plated copper alloy
Cam Switching Contacts: Silver plated copper alloy
MECHANICAL:
Jack Mechanical Life: 30,000 cycles
Cam Contact Mechanical Life: 30,000 cycles
Insertion – Withdrawal Forces: 1 – 4 lbs.
Moisture resistance: MIL-STD 202 Method 106
Thermal shock: MIL-STD 202 Method 107
Salt spray: MIL-STD 202 Method 101 (48 hrs.)
Vibration: MIL-STD 202 Method 213
ELECTRICAL:
Jack Spring Contact Resistance: 30 milliohm Maximum
Cam Switch Contact Resistance: 30 milliohm Maximum
Insulation Resistance: 10,000 Megaohms
Dielectric Withstanding Voltage: 500 VAC (rms) at 60 Hz
Insertion Loss: -0.5dB up to 10 MHz
TT
EZN
_
10
_
_
E90
_
H
15
P
D
E56
E38
T
20
IDC
B
3PIN
WW
SL
CDL
FA
• WIRE WRAP AND SOLDER LUG NOT AVAILABLE AS PREWIRES.
• EVERYTHING EXCEPT SOLDER LUG AND WIRE WRAP AVAILABLE AS PREWIRE ONLY.
• IDC NOT AVAILABLE IN 1 RACK UNIT HEIGHT.
• FRONT ACCESS ONLY AVAILABLE AS 1 RACK UNIT WITH IDC SUPPORTS.
• FRONT ACCESS HAS TRAY AND BAR COMBO SO NO SUPPORT DESIGNATION IS USED.
• CABLE TRAY AND CABLE BAR DESIGNATIONS USED FOR UNWIRED UNITS ONLY.
• UMBILICAL UNIT STANDARD WITH 4' HARNESS AND 2RU FRONT AND BACK PLANE.
www.switchcraft.com
5555 North Elston Avenue / Chicago, IL. 60630
Phone: [phone] Fax: [phone]