020180MHANBM409ZA Datasheet, PDF (8/9 Pages) SUYIN USA, INC. – RJ45+STACK USB W/LED & TRANSFORMER

SUYIN CORPORATION
SPECIFICATION
DOCUMENT NO.: 020180MHANBM409ZA
SUYIN P/N. : 020180MHANBM409ZA
CUSTOMER P/N. :
DESC. : RJ45+ STACK USB W/ LED &
TRANSFORMER
6-2 Transmitter & Receiver Filter:
Insertion Loss
(dB MAX)
1~125MHz
-1.2
1~30MHz
-18
Return Loss at 100Ω
(dB MIN)
30~60MHz
-16
60~80MHz
-12
80~100MHz
-10
6-3 Common Mode Rejection @ 1~100 MHz: -30dB MIN
6-4 Cross Talk @ 1~100 MHz: -25dB MIN
6-5 Inductance @ 100KHz/ 0.1V, 8mA DC BIAS: 350µH MIN
6-6 HiPot Test: 1500Vrms, 60sec
6-7 LED:
Forward Voltage (V) @ 20mA
Typical
MAX
2.2
2.6
7 OPERATING & TEST REQUIRMENTS
Product is designed to meet electrical, mechanical and environmental performance requirements
specified below. All tests are performed at ambient environmental conditions per
MIL-STD-1344A and EIA-364 unless otherwise specified
7-1 Operating Temperature Range: 0℃ TO +70℃
7-2 Storage Temperature: -40℃ to 85℃
7-3 USB module complies with USB 2.0 standards
7-4 USB Ratings
1. Insulation Resistance: 1000 M Ohm(MIN)
2. Contact Resistance : 25 m Ohm(MAX)
2. Dielectric Withstanding Voltage: 750 VAC
Page 8 of 9