English
Language : 

VN2450N8-G Datasheet, PDF (1/6 Pages) Supertex, Inc – N-Channel Enhancement-Mode Vertical DMOS FETs
VN2450
N-Channel Enhancement-Mode
Vertical DMOS FETs
Features
► Free from secondary breakdown
► Low input and output leakage
► Low CISS and fast switching speeds
► High input impedance and high gain
Applications
► Motor controls
► Converters
► Amplifiers
► Switches
► Power supply circuits
► Drivers (relays, hammers, solenoids, lamps,
memories, displays, bipolar transistors, etc.)
General Description
This enhancement-mode (normally-off) transistor utilizes a
vertical DMOS structure and Supertex’s well-proven silicon-gate
manufacturing process. This combination produces a device with
the power handling capabilities of bipolar transistors and with
the high input impedance and positive temperature coefficient
inherent in MOS devices. Characteristic of all MOS structures,
this device is free from thermal runaway and thermally induced
secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide range
of switching and amplifying applications where high breakdown
voltage, high input impedance, low input capacitance, and fast
switching speeds are desired.
Ordering Information
Device
Package Options
TO-92
TO-243AA
(SOT-89)
BVDSS/BVDGS
(V)
VN2450
VN2450N3-G
VN2450N8-G
500
-G indicates package is RoHS compliant (‘Green’)
Pin Configurations
RDS(ON)
(max)
(Ω)
13
ID(ON)
(min)
(mA)
500
DRAIN
DRAIN
Absolute Maximum Ratings
Parameter
Value
Drain-to-source voltage
Drain-to-gate voltage
Gate-to-source voltage
BVDSS
BVDGS
±20V
Operating and storage temperature -55°C to +150°C
Soldering temperature*
+300°C
Absolute Maximum Ratings are those values beyond which damage to the device
may occur. Functional operation under these conditions is not implied. Continuous
operation of the device at the absolute rating level may affect device reliability. All
voltages are referenced to device ground.
* Distance of 1.6mm from case for 10 seconds.
SOURCE
GATE
TO-92 (N3)
SOURCE
DRAIN
GATE
TO-243AA (SOT-89) (N8)
Product Marking
SiVN YY = Year Sealed
2 4 5 0 WW = Week Sealed
YYWW
= “Green” Packaging
Package may or may not include the following marks: Si or
TO-92 (N3)
VN4EW
W = Code for week sealed
= “Green” Packaging
Package may or may not include the following marks: Si or
TO-243AA (SOT-89) (N8)
● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com