VN0300L-G Datasheet, PDF (1/3 Pages) Supertex, Inc – N-Channel Enhancement-Mode Vertical DMOS FET

VN0300
N-Channel Enhancement-Mode
Vertical DMOS FET
Features
► Free from secondary breakdown
► Low power drive requirement
► Ease of paralleling
► Low C_ISS and fast switching speeds
► Excellent thermal stability
► Integral source-drain diode
► High input impedance and high gain
Applications
► Motor controls
► Converters
► Amplifiers
► Switches
► Power supply circuits
► Drivers (relays, hammers, solenoids, lamps,
memories, displays, bipolar transistors, etc.)
General Description
This enhancement-mode (normally-off) transistor utilizes
a vertical DMOS structure and Supertex’s well-proven,
silicon-gate manufacturing process. This combination
produces a device with the power handling capabilities
of bipolar transistors and the high input impedance and
positive temperature coefficient inherent in MOS devices.
Characteristic of all MOS structures, this device is free
from thermal runaway and thermally-induced secondary
breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a
wide range of switching and amplifying applications where
very low threshold voltage, high breakdown voltage, high
input impedance, low input capacitance, and fast switching
speeds are desired.
Ordering Information
Device
Package Option
TO-92
VN0300
VN0300L-G
-G indicates package is RoHS compliant (‘Green’)
BV_DSS/BV_DGS
(V)
30
R_DS(ON)
(max)
(Ω)
1.2
Pin Configuration
I_D(ON)
(min)
(A)
1.0
Absolute Maximum Ratings
Parameter
Value
Drain-to-source voltage
Drain-to-gate voltage
Gate-to-source voltage
BV_DSS
BV_DGS
±30V
Operating and storage temperature -55^OC to +150^OC
Soldering temperature*
300^OC
Absolute Maximum Ratings are those values beyond which damage to the device
may occur. Functional operation under these conditions is not implied. Continuous
operation of the device at the absolute rating level may affect device reliability. All
voltages are referenced to device ground.
* Distance of 1.6mm from case for 10 seconds.
SOURCE
DRAIN
GATE
TO-92 (L)
Product Marking
Si VN _{YY = Year Sealed}
0 3 0 0 L _{WW = Week Sealed}
YYWW
= “Green” Packaging
Package may or may not include the following marks: Si or
TO-92 (L)
● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: [phone] ● www.supertex.com