TP2635 Datasheet, PDF (1/4 Pages) Supertex, Inc – P-Channel Enhancement-Mode Vertical DMOS FETs

TP2635
TP2640
Low Threshold
P-Channel Enhancement-Mode
Vertical DMOS FETs
Ordering Information
BV_DSS /
BV_DGS
-350V
R_DS(ON)
(max)
15Ω
-400V
15Ω
† _{MIL visual screening available.}
V_GS(th)
(max)
-2.0V
-2.0V
Features
❏ Low threshold — -2.0V max.
❏ High input impedance
❏ Low input capacitance
❏ Fast switching speeds
❏ Low on resistance
❏ Free from secondary breakdown
❏ Low input and output leakage
❏ Complementary N- and P-channel devices
I_D(ON)
(min)
-0.7A
-0.7A
Order Number / Package
SO-8
TO-92
Die^†
–
TP2635N3
—
TP2640LG
TP2640N3
TP2640ND
Low Threshold DMOS Technology
These low threshold enhancement-mode (normally-off) transis-
tors utilize a vertical DMOS structure and Supertex’s well-proven
silicon-gate manufacturing process. This combination produces
devices with the power handling capabilities of bipolar transistors
and with the high input impedance and positive temperature
coefficient inherent in MOS devices. Characteristic of all MOS
structures, these devices are free from thermal runaway and
thermally-induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide range
of switching and amplifying applications where very low threshold
voltage, high breakdown voltage, high input impedance, low input
capacitance, and fast switching speeds are desired.
Applications
❏ Logic level interfaces – ideal for TTL and CMOS
❏ Solid state relays
❏ Battery operated systems
❏ Photo voltaic drives
❏ Analog switches
❏ General purpose line drivers
❏ Telecom switches
Package Options
SGD
TO-92
Absolute Maximum Ratings
Drain-to-Source Voltage
Drain-to-Gate Voltage
Gate-to-Source Voltage
Operating and Storage Temperature
Soldering Temperature*
* Distance of 1.6 mm from case for 10 seconds.
BV_DSS
BV_DGS
± 20V
-55°C to +150°C
300°C
NC ¹
NC ²
S³
4
G
SO-8
top view
8_D
7
D
6
D
5
D
Note: See Package Outline section for dimensions.
11/12/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex prod₁ucts, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.