TP2540N8-G Datasheet, PDF (1/5 Pages) Supertex, Inc – P-Channel Enhancement Mode Vertical DMOS FETs

Supertex inc.
TP2535
P-Channel Enhancement Mode
Vertical DMOS FETs
Features
► Low threshold (-2.4V max.)
► High input impedance
► Low input capacitance (125pF max.)
► Fast switching speeds
► Low on-resistance
► Free from secondary breakdown
► Low input and output leakage
Applications
► Logic level interfaces - ideal for TTL and CMOS
► Solid state relays
► Battery operated systems
► Photo voltaic drives
► Analog switches
► General purpose line drivers
► Telecom switches
General Description
This low threshold enhancement-mode (normally-off)
transistor utilizes a vertical DMOS structure and Supertex’s
well-proven silicon-gate manufacturing process. This
combination produces a device with the power handling
capabilities of bipolar transistors and with the high input
impedance and positive temperature coefficient inherent
in MOS devices. Characteristic of all MOS structures,
this device is free from thermal runaway and thermally-
induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide
range of switching and amplifying applications where very
low threshold voltage, high breakdown voltage, high input
impedance, low input capacitance, and fast switching
speeds are desired.
Ordering Information
Device
Package Option
TO-92
TP2535
TP2535N3-G
-G indicates package is RoHS compliant (‘Green’)
BV_DSS/BV_DGS
(V)
-350
R_DS(ON)
(max)
(Ω)
25
V_GS(th)
(max)
(V)
-2.4
Pin Configuration
I_D(ON)
(min)
(A)
-0.4
Absolute Maximum Ratings
Parameter
Value
Drain-to-source voltage
Drain-to-gate voltage
Gate-to-source voltage
BV_DSS
BV_DGS
±20V
Operating and storage temperature
-55°C to +150°C
Soldering temperature*
+300°C
Absolute Maximum Ratings are those values beyond which damage to the device may
occur. Functional operation under these conditions is not implied. Continuous operation
of the device at the absolute rating level may affect device reliability. All voltages are
referenced to device ground.
* Distance of 1.6mm from case for 10 seconds.
DRAIN
SOURCE
GATE
TO-92 (N3)
Product Marking
SiTP
2535
YYWW
YY = Year Sealed
WW = Week Sealed
= “Green” Packaging
Package may or may not include the following marks: Si or
TO-92 (N3)
Supertex inc. ● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: [phone] ● www.supertex.com