TP2502N8-G Datasheet, PDF (1/5 Pages) Supertex, Inc – P-Channel Enhancement Mode Vertical DMOS FETs

TP2502
P-Channel Enhancement Mode
Vertical DMOS FETs
Features
► Low threshold (-2.4V max.)
► High input impedance
► Low input capacitance (125pF max.)
► Fast switching speeds
► Low on-resistance
► Free from secondary breakdown
► Low input and output leakage
Applications
► Logic level interfaces - ideal for TTL and CMOS
► Solid state relays
► Battery operated systems
► Photo voltaic drives
► Analog switches
► General purpose line drivers
► Telecom switches
General Description
This low threshold enhancement-mode (normally-off) tran-
sistor utilizes a vertical DMOS structure and Supertex’s well-
proven silicon-gate manufacturing process. This combination
produces a device with the power handling capabilities of bipolar
transistors and with the high input impedance and positive
temperature coefficient inherent in MOS devices. Characteristic
of all MOS structures, this device is free from thermal runaway
and thermally-induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide
range of switching and amplifying applications where very
low threshold voltage, high breakdown voltage, high input
impedance, low input capacitance, and fast switching speeds
are desired.
Ordering Information
Device
Package Options
TO-243AA (SOT-89)
Die*
TP2502
TP2502N8-G
-G indicates package is RoHS compliant (‘Green’)
* MIL visual screening available.
TP2502ND
BV_DSS/BV_DGS
(V)
-20
R_DS(ON)
(Ω)
2.0
V_GS(TH)
(max)
(V)
-2.4
Pin Configuration
DRAIN
I_D(ON)
(min)
(A)
-2.0
Absolute Maximum Ratings
Parameter
Drain-to-source voltage
Drain-to-gate voltage
Gate-to-source voltage
Value
BV_DSS
BV_DGS
±20V
Operating and storage temperature
-55°C to +150°C
Soldering temperature*
300°C
Absolute Maximum Ratings are those values beyond which damage to the device may
occur. Functional operation under these conditions is not implied. Continuous operation
of the device at the absolute rating level may affect device reliability. All voltages are
referenced to device ground.
* Distance of 1.6 mm from case for 10 seconds.
SOURCE
DRAIN
GATE
TO-243AA (SOT-89) (N8)
Product Marking
TP5LW
W = Code for week sealed
= “Green” Packaging
Package may or may not include the following marks: Si or
TO-243AA (SOT-89) (N8)
● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: [phone] ● www.supertex.com