TP2435 Datasheet, PDF (1/4 Pages) Supertex, Inc – P-Channel Enhancement-Mode Vertical DMOS FETs

TP2435
Low Threshold
P-Channel Enhancement-Mode
Vertical DMOS FETs
Ordering Information
BV_DSS /
BV_DGS
-350V
R_DS(ON)
(max)
15Ω
V_GS(th)
(max)
-2.4V
I_D(ON)
(min)
-800mA
* Same as SOT-89. Product supplied on 2000 piece carrier tape reels.
** Die in wafer form.
Order Number / Package
TO-243AA*
Die**
TP2435N8
TP2435NW
Product marking for TO-243AA:
TP4S❋
where ❋ = 2-week alpha date code
Features
Low threshold
High input impedance
Low input capacitance
Fast switching speeds
Free from secondary breakdown
Low input and output leakage
Complementary N- and P-channel devices
Applications
Logic level interfaces
Solid state relays
Linear Amplifiers
Power Management
Analog switches
Telecom switches
Absolute Maximum Ratings
Drain-to-Source Voltage
BV_DSS
Drain-to-Gate Voltage
Gate-to-Source Voltage
BV_DGS
± 20V
Operating and Storage Temperature
-55°C to +150°C
Soldering Temperature*
300°C
* Distance of 1.6 mm from case for 10 seconds.
Low Threshold DMOS Technology
These low threshold enhancement-mode (normally-off) power
transistors utilize a vertical DMOS structure and Supertex's well-
proven silicon-gate manufacturing process. This combination
produces devices with the power handling capabilities of bipolar
transistors and with the high input impedance and positive
temperature coefficient inherent in MOS devices. Characteristic
of all MOS structures, these devices are free from thermal
runaway and thermally induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide range
of switching and amplifying applications where very low threshold
voltage, high breakdown voltage, high input impedance, low input
capacitance, and fast switching speeds are desired.
Package Option
D
G
D
S
TO-243AA
(SOT-89)
Note: See Package Outline section for dimensions.
11/12/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No
Supertex website:
responsibility is assumed for possible omissions or inaccuracies.
http://www.supertex.com. For complete liability information on all
CSiurcpueirttreyxapnrdod₁supcetcsi,firceafteior ntos
are
the
subject to change without notice. For the latest product specifications, refer to the
most current databook or to the Legal/Disclaimer page on the Supertex website.