English
Language : 

TP2424N8-G Datasheet, PDF (1/3 Pages) Supertex, Inc – P-Channel Enhancement Mode Vertical DMOS FETs
TP2424
P-Channel Enhancement Mode
Vertical DMOS FETs
Features
► Low threshold
► High input impedance
► Low input capacitance
► Fast switching speeds
► Free from secondary breakdown
► Low input and output leakage
Applications
► Logic level interfaces
► Solid state relays
► Linear amplifiers
► Power management
► Analog switches
► Telecom switches
General Description
This low threshold enhancement-mode (normally-off)
transistor utilizes a vertical DMOS structure and Supertex’s
well-proven silicon-gate manufacturing process. This
combination produces a device with the power handling
capabilities of bipolar transistors and with the high input
impedance and positive temperature coefficient inherent
in MOS devices. Characteristic of all MOS structures,
this device is free from thermal runaway and thermally-
induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide
range of switching and amplifying applications where very
low threshold voltage, high breakdown voltage, high input
impedance, low input capacitance, and fast switching
speeds are desired.
Ordering Information
Device
Package Option
TO-243AA (SOT-89)
TP2424
TP2424N8-G
-G indicates package is RoHS compliant (‘Green’)
BVDSS/BVDGS
(V)
-240
RDS(ON)
(max)
(Ω)
8.0
VGS(th)
(max)
(V)
-2.4
Pin Configuration
DRAIN
ID(ON)
(min)
(mA)
-800
Absolute Maximum Ratings
Parameter
Drain-to-source voltage
Drain-to-gate voltage
Gate-to-source voltage
Value
BVDSS
BVDGS
±20V
Operating and storage temperature
-55°C to +150°C
Soldering temperature*
300°C
Absolute Maximum Ratings are those values beyond which damage to
the device may occur. Functional operation under these conditions is not
implied. Continuous operation of the device at the absolute rating level
may affect device reliability. All voltages are referenced to device ground.
* Distance of 1.6 mm from case for 10 seconds.
SOURCE
DRAIN
GATE
TO-243AA (SOT-89) (N8)
Product Marking
TP4CW
W = Code for week sealed
= “Green” Packaging
Package may or may not include the following marks: Si or
TO-243AA (SOT-89) (N8)
● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com