TN5325 Datasheet, PDF (1/2 Pages) Supertex, Inc – N-Channel Enhancement-Mode Vertical DMOS FETs

TN5325
Low Threshold
N-Channel Enhancement-Mode
Vertical DMOS FETs
Ordering Information
BV_DSS /
BV_DGS
250V
R_DS(ON)
(max)
7.0Ω
V_GS(th)
(max)
2.0V
I_D(on)
(min)
1.2A
Order Number / Package
TO-236AB*
TO-92
TO-243AA**
TN5325K1 TN5325N3 TN5325N8
Product marking for SOT-23:
N3C❋
where ❋ = 2-week alpha date code
* Same as SOT-23. All units shipped on 3,000 piece carrier tape reels.
** Shipped on 2,000 piece carrier tape and reels.
Features
❏ Low threshold – 2.0V max.
❏ Free from secondary breakdown
❏ Low power drive requirement
❏ Low C_ISS and fast switching speeds
❏ Excellent thermal stability
❏ High input impedance and high gain
❏ Complementary N- and P-channel devices
Applications
❏ Logic level interfaces – ideal for TTL and CMOS
❏ Solid state relays
❏ Battery operated systems
❏ Photo voltaic drives
❏ Analog switches
❏ General purpose line drivers
❏ Telecom switches
Product marking for TO-243AA
TN3C❋
Where ❋ = 2-week alpha date code
Advanced DMOS Technology
These enhancement-mode (normally-off) transistors utilize a
vertical DMOS structure and Supertex’s well-proven silicon-gate
manufacturing process. This combination produces devices with
the power handling capabilities of bipolar transistors and with the
high input impedance and positive temperature coefficient inher-
ent in MOS devices. Characteristic of all MOS structures, these
devices are free from thermal runaway and thermally-induced
secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide range
of switching and amplifying applications where high breakdown
voltage, high input impedance, low input capacitance, and fast
switching speeds are desired.
Package Options
Absolute Maximum Ratings
Drain-to-Source Voltage
Drain-to-Gate Voltage
Gate-to-Source Voltage
BV_DSS
BV_DGS
± 20V
Operating and Storage Temperature
-55°C to +150°C
Soldering Temperature*
300°C
* Distance of 1.6 mm from case for 10 seconds.
SGD
TO-92
D
G
D
S
TO-243AA
(SOT-89)
D
G
S
TO-236AB
(SOT-23)
Note: See Package Outline section for dimensions.
11/12/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex prod₁ucts, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.