TN0104 Datasheet, PDF (1/4 Pages) Supertex, Inc – N-Channel Enhancement-Mode Vertical DMOS FETs

TN0104
Low Threshold
N-Channel Enhancement-Mode
Vertical DMOS FETs
Ordering Information
BV_DSS /
BV_DGS
40V
R_DS(ON)
(max)
1.8Ω
V_GS(th)
(max)
1.6V
I_D(ON)
(min)
2.0A
40V
2.0Ω
1.6V
2.0A
* Same as SOT-89. Product supplied on 2000 piece carrier tape reels.
† _{MIL visual screening available}
Features
Low threshold —1.6V max.
High input impedance
Low input capacitance
Fast switching speeds
Low on resistance
Free from secondary breakdown
Low input and output leakage
Complementary N- and P-channel devices
Applications
Logic level interfaces – ideal for TTL and CMOS
Solid state relays
Battery operated systems
Photo voltaic drives
Analog switches
General purpose line drivers
Telecom switches
Order Number / Package
TO-92
TO-243AA*
Die^†
TN0104N3
—
TN0104ND
—
TN0104N8
—
7
Product marking for TO-243AA:
TN1L*
Where *=2-week alpha date code
Low Threshold DMOS Technology
These low threshold enhancement-mode (normally-off) transis-
tors utilize a vertical DMOS structure and Supertex’s well-proven
silicon-gate manufacturing process. This combination produces
devices with the power handling capabilities of bipolar transistors
and with the high input impedance and positive temperature
coefficient inherent in MOS devices. Characteristic of all MOS
structures, these devices are free from thermal runaway and
thermally-induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide range
of switching and amplifying applications where very low threshold
voltage, high breakdown voltage, high input impedance, low input
capacitance, and fast switching speeds are desired.
Package Options
Absolute Maximum Ratings
Drain-to-Source Voltage
Drain-to-Gate Voltage
Gate-to-Source Voltage
BV_DSS
BV_DGS
± 20V
Operating and Storage Temperature
-55°C to +150°C
Soldering Temperature*
300°C
* For TO-39 and TO-92, distance of 1.6 mm from case for 10 seconds.
7-31
D
G
D
S
TO-243AA
(SOT-89)
SGD
TO-92
Note: See Package Outline section for dimensions.