TC6320 Datasheet, PDF (1/3 Pages) Supertex, Inc – N- and P-Channel Enhancement-Mode MOSFET Pair

TC6320
________________________________________________________________________________
Initial Release
N- and P-Channel Enhancement-Mode MOSFET Pair
Features
Integrated gate-source resistor
Integrated gate-source zener diode
Low threshold
Low on-resistance
Independent N- and P-channels
Electrically isolated N- and P-channels
Low input capacitance
Fast switching speeds
Free from secondary breakdowns
Low input and output leakage
Application
High voltage pulsers
Amplifiers
Buffers
Piezoelectric transducer drivers
General purpose line drivers
Logic level interfaces
General Description
The Supertex TC6320TG consists of a high voltage low
threshold N-channel and P-channel MOSFET in an SO-8
package. Both MOSFETs have integrated gate-source
resistors and gate-source zener diode clamps which are
desired for high voltage pulser applications. TC6320TG, a
complementary high-speed, high voltage, gate-clamped
N- and P-channel MOSFET pair in a single SO-8
package. The TC6320TG offers 200V breakdown voltage,
2.0A output peak current and low input capacitance. The
2.0A output current capability will minimize rise and fall
times. The low input capacitance will minimize
propagation delay times and also rise and fall times. The
MOSFETs have integrated gate-source resistors and
gate-source zener diode clamps that are desired for high
voltage pulser applications saving board space and
improving performance. It is specifically designed for
applications in medical ultrasound transmitters and non-
destructive evaluation in materials flaw detection, but it
can also be used as an efficient buffer.
Package Option
Absolute Maximum Ratings*
Drain-to-Source Voltage
Drain-to-Gate Voltage
Operating and Storage Temperature
BV_DSS
BV_DGS
-55°C to +150°C
Soldering Temperature*
300°C
*Distance of 1.6mm from case for 10 seconds.
S1 1
G1 2
S2 3
G2 4
N-Channel
P-Channel
SO-8 Package
(top view)
8 D1
7 D1
6 D2
5 D2
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate
"products liability indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices
determined to be defective due to workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For
the latest product specifications, refer to the Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or
to the Legal/Disclaimer page on the Supertex website.