|
HV809_13 Datasheet, PDF (1/8 Pages) Supertex, Inc – Off-Line, High Voltage EL Lamp Driver | |||
|
Supertex inc.
HV809
Off-Line, High Voltage
EL Lamp Driver
Features
âºâº Processed with HVCMOS® technology
âºâº Input voltage up to 200V DC
âºâº 400V peak-to-peak output voltage
âºâº Output load up to 350nF (100in2 for 3.5nF/in2 lamp)
âºâº Adjustable output lamp frequency
âºâº Adjustable on/off pulsing frequency
Applications
âºâº Electronic organizers
âºâº Handheld portable computers
âºâº Display signs
âºâº Portable instrumentation equipment
General Description
The Supertex HV809 is an off-line, high voltage, EL lamp
driver integrated circuit designed for driving EL lamps of up to
350nF at 400Hz. The input supply voltage can be a rectified
nominal 120V AC source or any other DC source up to 200V.
The HV809 will supply the EL lamp with an AC square wave
with a peak-to-peak voltage of two times the input DC voltage.
The HV809 has two internal oscillators, a low voltage output
linear regulator, and a high voltage output H-bridge. The high
voltage output H-bridge frequency is set by an external resis-
tor connected between the REL-Osc and GND pins. The EL
lamp is connected between pins VA and VB. For the HV809 in
the 8-pin package, an external RC network can be connected
between the oscillatorâs Osc1 and Osc2 pins to pulse the EL
lamp on and off.
For detailed circuit and application information please refer to
Application Note AN-H36.
Block Diagram
HVIN
Linear
Regulator
VDD
Q
VA
Q
Osc1
Osc2
REL-Osc
GND
Q
Logic
and
VB
Osc
Q
Doc.# DSFP-HV809
B071013
Supertex inc.
www.supertex.com
|
▷ |