HV6506 Datasheet, PDF (1/5 Pages) Supertex, Inc – 32-Channel LCD Driver with Separate Backplane Output

HV6506
32-Channel LCD Driver
with Separate Backplane Output
Ordering Information
Device
HV6506
44-J Lead Quad
Plastic Chip Carrier
HV6506PJ
Package Options
44 Lead Quad
Plastic Gullwing
HV6506PG
Dice
in waffle pack
HV6506X
Features
■ Processed with HVCMOS^® technology
■ 32 push-pull CMOS output up to 60V
■ Low power level shifting
■ Source/sink current minimum 5mA
■ Shift register speed 5MHz
■ Latched data outputs
■ Bidirectional shift register (DIR)
■ Backplane output
General Description
The HV65 is a low-voltage serial to high-voltage parallel converter
with push-pull outputs. This device has been designed for use as
a driver circuit for LCD displays. It can also be used in any
application requiring multiple output high-voltage current sourc-
ing and sinking capabilities. The inputs are fully CMOS compat-
ible.
The device consists of a 32-bit shift register, 32 latches, and
control logic to perform the polarity select of the outputs. HVout1
is connected to the first stage of the shift register through the
polarity logic. Data is shifted through the shift register on the logic
low to high transition of the clock. A DIR pin causes data shifting
counterclockwise when grounded and clockwise when connected
to V_DD. A data output buffer is provided for cascading devices.
This output reflects the current status of the last bit of the shift
register. Operation of the shift register is not affected by the LE
(latch enable) or the POL (polarity) inputs. Transfer of data from
the shift register to the latch occurs when the LE (latch enable)
input is high. The data in the latch is stored after LE transition from
high to low.
Absolute Maximum Ratings¹
Supply voltage, V_DD2
Output voltage, V_PP2
Logic input levels²
Ground current³
Continuous total power dissipation⁴
Operating temperature range
Storage temperature range
Lead temperature 1.6mm (1/16 inch)
from case for 10 seconds
-0.5V to +7.0V
-0.5V to +80V
-0.5V to V_DD + 0.5V
1.5A
1200mW
-40°C to +85°C
-65°C to +125°C
260°C
Notes:
1. Device will survive (but operation may not be specified or guaranteed) at
these extremes.
2. All voltages are referenced to V_SS.
3. Duty cycle is limited by the total power dissipated in the package.
4. For operation above 25°C ambient derate linearly to 85°C at 20mW/°C.
12-132