HV5523 Datasheet, PDF (1/6 Pages) Supertex, Inc – 32-Channel Serial To Parallel Converter With Open Drain Outputs

Supertex inc.
HV5523
32-Channel Serial To Parallel Converter
With Open Drain Outputs
Features
►► Processed with HVCMOS^® technology
►► Sink current minimum 100mA
►► Shift register speed 16MHz
►► Polarity and blanking inputs
►► CMOS compatible inputs
Applications
►► Inkjet and Electrostatic Print Heads
►► AC-Electroluminescent Displays
►► MEMS Applications
General Description
The HV5523 is a low-voltage serial to high-voltage parallel converter
with open drain outputs. This device has been designed for use as
a driver for AC-electroluminescent displays. It can also be used in
any application requiring multiple output high voltage current sinking
capabilities, such as driving inkjet and electrostatic print heads,
plasma panels, and vacuum fluorescent or large matrix LCD displays.
This device consists of a 32-bit shift register, 32 latches, and control
logic to perform the polarity selection and blanking of the outputs.
Data are shifted through the shift register on the high to low transition
of the clock. The HV5523 shifts in a counter-clockwise direction when
viewed from the top of the package. A data output buffer is provided
for cascading devices. This output reflects the current status of the last
bit of the shift register. Operation of the shift register is not affected by
the LE (latch enable), BL (blanking), or POL (polarity) inputs. Transfer
of data from the shift register to the latch occurs when the LE (latch
enable) input is high. The data in the latch is stored when LE is low.
Block Diagram
POL
BL
LE
DATA
INPUT
CLK
32-Bit
Shift
Register
DATA
OUTPUT
Latch
Latch
Latch
Latch
HV_OUT1
HV_OUT2
(Outputs 3 to 30
not shown)
HV_OUT31
HV_OUT32
Supertex inc. ● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: [phone] ● www.supertex.com