HV5122 Datasheet, PDF (1/6 Pages) Supertex, Inc – 32-Channel Serial To Parallel Converter With Open Drain Outputs

HV5122
HV5222
32-Channel Serial To Parallel Converter
With Open Drain Outputs
Ordering Information
Package Options
Device
44 J-Lead Quad
44 J-Lead Quad
Ceramic Chip Carrier Plastic Chip Carrier
44 Lead Quad
Plastic Gullwing
HV5122
HV5122DJ
HV5122PJ
HV5122PG
HV5222
HV5222DJ
HV5222PJ
HV5222PG
Die
HV5122X
HV5222X
Features
■ Processed with HVCMOS^® technology
■ Output voltages to 225V using a ramped supply voltage
■ Sink current minimum 100mA
■ Shift register speed 8MHz
■ Strobe and enable inputs
■ CMOS compatible inputs
■ Forward and reverse shifting options
■ 44-lead ceramic surface mount package
■ Hi-Rel processing available
Absolute Maximum Ratings¹
Supply voltage, V_DD
Output voltage, V_PP
Logic input levels
Ground current²
-0.5V to +15V
-0.5V to +250V
-0.5V to V_DD + 0.5V
1.5A
Continuous total power dissipation³ Plastic
Ceramic
1200mW
1500mW
Operating temperature range
Plastic -40°C to +85°C
Ceramic -55 to +125°C
Storage temperature range
-65°C to +150°C
Lead temperature 1.6mm (1/16 inch)
from case for 10 seconds
260°C
Notes:
1. All voltages are referenced to GND.
2. Duty cycle is limited by the total power dissipated in the package.
3. For operation above 25°C ambient derate linearly to maximum operating
temperature at 20mW/°C for plasitc and at 15mW/°C for ceramic.
General Description
The HV51 and HV52 are low voltage serial to high voltage parallel
converters with open drain outputs. These devices have been
designed for use as drivers for AC electroluminescent displays.
They can also be used in any application requiring multiple output
high voltage current sinking capabilities such as driving inkjet and
electrostatic print heads, plasma panels, vacuum fluorescent, or
large matrix LCD displays.
These devices consist of a 32-bit shift register and control logic to
perform the Output Enable and All-ON functions. Data is shifted
through the shift register on the high to low transition of the clock.
The HV51 shifts in the counterclockwise direction when viewed
from the top of the package and the HV52 shifts in the clockwise
direction. A data output buffer is provided for cascading devices.
This output reflects the current status of the last bit of the shift
register. Operation of the shift register is not affected by the OE
(Output Enable) or the STR (Strobe) inputs.
The HV51 and HV52 have been designed to be used in systems
which either switch off the high voltage supply before changing
the state of the high voltage outputs or which limit the current
through each output.
12/13/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex prod1ucts, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.