HV4522 Datasheet, PDF (1/6 Pages) Supertex, Inc – 32 CHANNEL SERIAL TO PARALLEL CONVERTER WITH P CHANNEL OPEN DRAIN OUTPUTS

HV4522
HV4622
32-Channel Serial To Parallel Converter
with P-Channel Open Drain Outputs
Ordering Information
Device
HV4522
HV4622
Recommended
Operating
V_PP Max
-220
-220
44 J-Lead Quad
Ceramic Chip Carrier
HV4522DJ
HV4622DJ
Package Options
44 J-Lead Quad
Plastic Chip Carrier
44 Quad Plastic
Gullwing
HV4522PJ
HV4522PG
HV4622PJ
HV4622PG
Die
HV4522X
HV4622X
Features
❑ Processed with HVCMOS Technology
❑ Output voltages to -220V
❑ Source current minimum 60 mA
❑ Shift register speed 8 MHz
❑ Polarity and blanking inputs
❑ CMOS compatible inputs
❑ Forward and reverse shifting options
❑ 44-lead plastic and ceramic surface mount packages
❑ Hi-Rel processing available
❑ Can be used with the HV55 and HV56 to provide 220V
push pull operation
Absolute Maximum Ratings¹
Supply voltage, V_DD
Off state output voltage
+0.5V to -16V
HV4522/ HV4622 +0.5V to -240V
Logic input levels
Ground current²
+0.5V to V_DD - 0.3V
1.5A
Continuous total power dissipation ³ Plastic
Ceramic
1200mW
1500mW
Operating temperature range
Ceramic -55°C to +125°C
Plastic -40°C to +85°C
Storage temperature range
-65°C to +150°C
Lead temperature 1.6mm (1/16 inch)
from case for 10 seconds
260°C
Notes:
1. All voltages are referenced to V_SS.
2. Duty cycle is limited by the total power dissipated in the package.
3. For operation above 25°C ambient derate linearly to maximum operating
temperature at 20mW/°C for plastic and at 15mW/°C for ceramic.
General Description
The HV4522 and HV4622 are low-voltage serial to high-voltage
parallel converters with P-Channel open drain outputs. These
devices have been designed for use as drivers for AC-electrolu-
minescent displays. They can also be used in any application
requiring multiple output high-voltage current source capabilities
such as driving inkjet and electrostatic print heads, plasma
panels, or vacuum fluorescent displays.
These devices consist of a 32-bit shift register, 32 data latches,
and control logic to perform polarity and blanking functions. Data
is shifted through the shift register on the logic high-to-low
transition of the clock. The HV4522 shifts in the counterclockwise
direction when viewed from the top of the package and the
HV4622 shifts in the clockwise direction. A data output buffer is
provided for cascading devices. This output reflects the current
status of the last bit of the shift register. The data in the shift
register is latched when the latch enable pin is brought to logic
high and then returned to ground. If the latch enable pin is held
high, the latch becomes transparent and the shift register data is
directly reflected in the outputs.
For applications requiring active pull down as well as pull up, the
HV4522 and HV4622 can be paired with the HV55 and HV56
devices, respectively.
05/01/03
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex prod₁ucts, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.