|
HV3418PG-G Datasheet, PDF (1/7 Pages) Supertex, Inc – 64-Channel Serial to Parallel Converter With High Voltage Push-Pull Outputs | |||
|
Supertex inc.
HV3418
64-Channel Serial to Parallel Converter
With High Voltage
Push-Pull Outputs
Features
âºâº Processed with HVCMOS® technology
âºâº Output voltages to 180V
âºâº Low power level shifting
âºâº Shift register speed:
6.0MHz @ VDD = 5.0V
12MHz @ VDD = 12V
âºâº Latched data outputs
âºâº Output polarity and blanking
âºâº CMOS compatible inputs
âºâº Forward and reverse shifting options
General Description
The HV3418 is a low voltage serial to high voltage parallel
converter with push-pull outputs. This device has been designed
for use as a printer driver for inkjet applications. It can also be
used in any application requiring multiple output, high voltage,
low current sourcing and sinking capabilities.
The device consists of a 64-bit shift register, 64 latches, and
control logic to perform the polarity select and blanking of the
outputs. A DIR pin controls the direction of data shift through
the device. With DIR grounded, DIOA is Data-In and DIOB is
Data-Out; data is shifted from HVOUT64 to HVOUT1. When DIR
is at logic high, DIOB is Data-In and DIOA is Data-Out: data is
then shifted from HVOUT1 to HVOUT64. Data is shifted through
the shift register on the low to high transition of the clock. Data
output buffers are provided for cascading devices. Operation
of the shift register is not affected by the LE (latch enable), BL
(blanking), or the POL(polarity) inputs. Transfer of data from the
shift register to the latch occurs when the LE (latch enable) is
high. The data in the latch is stored during LE transition from
high to low.
Functional Block Diagram
POL
BL
LE
DIOA
VPP
HVOUT1
CLK
DIR
64 bit
Static Shift
Register
64 Latches
HVOUT2
â¢
â¢
â¢
60 Additional
Outputs
â¢
â¢
â¢
HVOUT63
HVOUT64
DIOB
Supertex inc. â 1235 Bordeaux Drive, Sunnyvale, CA 94089 â Tel: 408-222-8888 â www.supertex.com
|
▷ |