HV2601 Datasheet, PDF (1/7 Pages) Supertex, Inc – Low Charge Injection 16-Channel High Voltage Analog Switch

Low Charge Injection 16-Channel
High Voltage Analog Switch
HV2601
Initial Release
Features
HVCMOS technology for high performance
16 Channels of high voltage analog switch
3.3V input logic level compatible
20MHz data shift clock frequency
Very low quiescent power dissipation -10µA
Low parasitic capacitance
DC to 10MHz analog signal frequency
-60dB typical off-isolation at 5MHz
CMOS logic circuitry for low power
Excellent noise immunity
Cascadable serial data register with latches
Flexible operating supply voltages
Applications
Medical ultrasound imaging
NDT metal flaw detection
Piezoelectric transducer drivers
Optical MEMS modules
General Description
The Supertex HV2601 is a low charge injection 16-channel high
voltage analog switch integrated circuit (IC) intended for use in
applications requiring high voltage switching controlled by low
voltage control signals, such as medical ultrasound imaging and
other piezoelectric transducer drivers.
Input data is shifted into a 16-bit shift register that can then be
retained in a 16-bit latch. To reduce any possible clock feed through
noise, the latch enable bar should be left high until all bits are clocked
in. Data are clocked in during the rising edge of the clock. Using
HVCMOS technology, this device combines high voltage bilateral
DMOS switches and low power CMOS logic to provide efficient
control of high voltage analog signals.
The device is suitable for various combinations of high voltage
supplies, e.g., V_PP/V_NN: +40V/-160V, +100V/-100V, and +160V/-40V.
Block Diagram
D_IN
CLK
16 BIT
SHIFT
REGISTER
LATCHES
D
LE
CL
LEVEL
SHIFTERS
OUTPUT
SWITCHES
D
LE
CL
D
LE
CL
SW0
SW1
SW2
D_OUT
D
LE
CL
D
LE
CL
V_{DD GND}
LE CL
V_NN V_PP
1
SW14
SW15
NR101705