HV20420 Datasheet, PDF (1/6 Pages) Supertex, Inc – Low Charge Injection 8-Channel High Voltage Analog Switch

HV20420
HV20620
Low Charge Injection
8-Channel High Voltage Analog Switch
Ordering Information
V_PP – V_NN
200V
200V
28-pin
plastic DIP
HV20420P
–
Package Options
28-lead plastic
chip carrier
HV20420PJ
HV20620PJ
Die
HV20420X
–
Features
s HVCMOS^® technology for high performance
s Low charge injection
s Very low quiescent power dissipation – 10µA
s Output On-resistance typically 22 ohms
s Low parasitic capacitances
s DC to 10MHz analog signal frequency
s -60dB typical output off isolation at 5MHz
s CMOS logic circuitry for low power
s Excellent noise immunity
s On-chip shift register, latch and clear logic circuitry
s Flexible high voltage supplies
s Surface mount package available
General Description
Not recommended for new designs. Please use HV202 instead.
This device is a low charge injection 8-channel high-voltage
analog switch integrated circuit (IC) intended for use in applica-
tions requiring high voltage switching controlled by low voltage
control signals, such as ultrasound imaging and printers. Input
data is shifted into an 8-bit shift register which can then be
retained in an 8-bit latch. To reduce any possible clock feed-
through noise, Latch Enable Bar (LE) should be left high until all
bits are clocked in. Using HVCMOS technology, this switch
combines high voltage bilateral DMOS switches and low power
CMOS logic to provide efficient control of high voltage analog
signals.
This IC is suitable for various combinations of high voltage
supplies, e.g., V_PP/V_NN : +50V/–150V, or +100V/–100V.
The specifications for the HV204 and HV206 are identical except
that the pinouts in the 28-lead plastic chip carrier are different.
Absolute Maximum Ratings*
V_DD Logic power supply voltage
V_PP - V_NN Supply voltage
V_PP Positive high voltage supply
V_NN Negative high voltage supply
Logic input voltages
Analog Signal Range
Peak analog signal current/channel
-0.5V to +18V
220V
-0.5V to V_NN +200V
+0.5V to -200V
-0.5V to V_DD +0.3V
V_NN to V_PP
3.0A
Storage temperature
-65°C to +150°C
Power dissipation
1.2W
* Absolute Maximum Ratings are those values beyond which damage to the
device may occur. Functional operation under these conditions is not implied.
Continuous operation of the device at the absolute rating level may affect
device reliability.
13-32