English
Language : 

HV100 Datasheet, PDF (1/5 Pages) Supertex, Inc – 3-Pin Hotswap, Inrush Current Limiter Controllers
HV100 HV100/HV101
HV101
DAevmailoabKliet
3-Pin Hotswap, Inrush Current Limiter Controllers
(Negative Supply Rail)
Features
❑ 33% Smaller than SOT-232
❑ Pass Element is Only External Part
❑ No Sense Resistor required
❑ Auto-Adapt* to Pass Element
❑ Short Circuit Protection*
❑ UV & POR Supervisory Circuits
❑ 2.5s Auto Retry
❑ ±10V to ±72V Input Voltage Range
❑ 0.6mA Typical Operating Supply Current
❑ Built in Clamp for AC Path Turn On Glitch
Applications
❑ -48V Central Office Switching (line cards)
❑ +48V Server Networks
❑ +48V Storage Area Networks
❑ +48V Peripherals, Routers, Switches
❑ +24V Cellular and Fixed Wireless (bay stations, line cards)
❑ +24V Industrial Systems
❑ +24V UPS Systems
❑ -48V PBX & ADSL Systems (line cards)
❑ Distributed Power Systems
❑ Powered Ethernet for VoIP
General Description
The HV100/HV101 are 3-pin hotswap controllers available in
SOT-223 and MLP packages, which require no external compo-
nents other than a pass element. The HV100/HV101 contain
many of the features found in hotswap controllers with 8 pins or
more, and which generally require many external components.
These features include undervoltage (UV) detection circuits,
power on reset (POR) supervisory circuits, inrush current limit-
ing, short circuit protection, and auto-retry. In addition, the
HV100/HV101 use a patent pending mechanism to sample and
adapt to any pass element, resulting in consistent hotswap
profiles without any programming.
The only difference between the HV100 and the HV101 is the
internally set undervoltage (UV) threshold.
Ordering Information
UV
Options
34V
14V
Package Options
3-Pin SOT-223 3-Pin MLP
HV100K5
HV100K6
HV101K5
HV101K6
Die
HV100X
HV101X
Typical Applications and Waveforms
GND
-48V
VPP
HV100 GATE
VNN
400µF
DC/DC
Converter
+5V
COM
IRF530
*Patents Pending
1IRF530 is a Trademark of International Rectifier Corporation
2MLP3x2 Package Version compared to 3mmx3mm SOT-23-6
08/26/02
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex prod1ucts, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.