DN3135 Datasheet, PDF (1/2 Pages) Supertex, Inc – N-Channel Depletion-Mode Vertical DMOS FETs

DN3135
DN3135
N-Channel Depletion-Mode
Vertical DMOS FETs
Ordering Information
BV_DSX /
BV_DGX
350V
R_DS(ON)
(max)
35Ω
I_DSS
(min)
180mA
Order Number / Package
TO-236AB**
DN3135K1
TO-243AA*
DN3135N8
Die***
DN3135NW
* Same as SOT-89. Products shipped on 2000 piece carrier tape reels.
** Same as SOT-23. Products skipped on 3000 piece carreir tape reels.
*** Die in wafer form.
Product marking for TO-243AA:
Product marking for SOT-23:
Features
❏ High input impedance
❏ Low input capacitance
❏ Fast switching speeds
❏ Low on resistance
❏ Free from secondary breakdown
❏ Low input and output leakage
Applications
❏ Normally-on switches
❏ Solid state relays
❏ Converters
❏ Linear amplifiers
❏ Constant current sources
❏ Power supply circuits
❏ Telecom
DN1S*
Where *= 2-week alpha date code
N1S*
Where *= 2-week alpha date code
Advanced DMOS Technology
These low threshold depletion-mode (normally-on) transistors
utilize an advanced vertical DMOS structure and Supertex’s
well-proven silicon-gate manufacturing process. This combina-
tion produces devices with the power handling capabilities of
bipolar transistors and with the high input impedance and posi-
tive temperature coefficient inherent in MOS devices. Character-
istic of all MOS structures, these devices are free from thermal
runaway and thermally-induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide range
of switching and amplifying applications where high breakdown
voltage, high input impedance, low input capacitance, and fast
switching speeds are desired.
Package Options
Drain
Absolute Maximum Ratings
Drain-to-Source Voltage
Drain-to-Gate Voltage
Gate-to-Source Voltage
BV_DSX
BV_DGX
± 20V
Operating and Storage Temperature
-55°C to +150°C
Soldering Temperature*
* Distance of 1.6 mm from case for 10 seconds.
300°C
Gate
Source
TO-236AB
(SOT-23)
top view
D
G
D
S
TO-243AA
(SOT-89)
Note: See Package Outline section for dimensions.
10/23/00
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.
1