|
STG1K152MND2535 Datasheet, PDF (1/3 Pages) Surge Components – High ripple current, High reliability | |||
|
ALUMINUM ELECTROLYTIC CAPACITORS
STG Series
ï¬ Load life 5,000 hours at 125 â.
ï¬ High ripple current, High reliability
ïµ SPECIFICATIONS
Item
Category Temperature Range
Working Voltage Range
Capacitance Range
Capacitance Tolerance
Performance Characteristics
-40 ~ +125â
10 ~ 100Vdc
680 ~ 47,000μF
±20% (at 25â and 120Hz)
Dissipation Factor
(tanδ)
(at 25â, 120Hz)
Leakage Current
Endurance
Rated Voltage (V) 10 16 25 35 50 63 80 100
tanδ(Max)
0.35 0.35 0.35 0.25 0.25 0.25 0.20 0.15
The above values should be increased by 0.02 for every additional 1000μF
I=0.02CV or 3000μA,whichever is smaller
I : Leakage current (μA) C : Rated capacitance (μF) V : Rated voltage (V)
Impress the rated voltage for 5 minutes.
The following requirements shall be satisfied when the capacitor are restored to 25â after the rated voltage applied for
5,000 hours at 125â.
Capacitance change
⦠±20% of the initial value
Dissipation factor(tanδ)
⦠200% of the specified value
Leakage current
⦠specified value
Shelf Life
The following requirements shall be satisfied when the capacitor are restored to 25â after exposing them for 1,000
hours at 125â without voltage applied.
Capacitance change
⦠±20% of the initial value
Dissipation factor(tanδ)
⦠200% of the specified value
Leakage current
⦠200% of the specified value
Others
ïµ DIMENSIONS (mm)
Terminal Code : ND : Standard
Sleeve
Negative mark
Safety vent
L+2 Max
4.0 ¡ Ã0.5
+
-
Conforms to JIS-C-5101-4 (1998), characteristic W.
PC board Pin-out
10¡ Ã0.5
2- 2
Terminal Code :K6 (ø35)
Sleeve
Vent
L+2 Max
*A
6.3±1.0
PC board pin-out
60¡ã
60¡ã
B
*C
-
Terminal B=positive
4- 2
Terminal A&C=blank
ïµ
PART NUMBERING SYSTEM( Example : 80V 1500µF )
S T G 1 K 1 5 2MND 2 5 3 5
Special Request
Size code(2535 : 25Ã35)
Terminal length code
Lead forming Type code
Capacitance tolerance code(M:±20%)
Capacitance code(1500μF)
Voltage code(80V)
Series code (STG)
|
▷ |