|
SPH2G331MND3045 Datasheet, PDF (1/2 Pages) Surge Components – The capacitor can be inserted into the PCB board | |||
|
ALUMINUM ELECTROLYTIC CAPACITORS
SPH Series
ï¬ The capacitor can be inserted into the PCB board.
ï¬ High ripple current and frame retardant type capacitor.
ï¬ Load life 2,000 hours at 105 â
ïµ SPECIFICATIONS
Item
Category Temperature Range
Working Voltage Range
Capacitance Range
Capacitance Tolerance
Performance Characteristics
-25 ~ +105â
400 ~ 450Vdc
82 ~560μF
±20% (at 25â and 120Hz)
Dissipation Factor
(tanδ)
(at 25â, 120Hz)
Leakage Current
Endurance
Rated Voltage (V)
400
450
tanδ(Max)
0.25
0.25
The above value should be increased by 0.02 for every additional 1000uF
I=0.02CV or 3000μA,whichever is smaller
I : Leakage current (μA) C : Rated capacitance (μF) V : Rated voltage (V)
Impress the rated voltage for 5 minutes.
The following requirements shall be satisfied when the capacitor are restored to 25â after the rated voltage applied
for 2,000 hours (1,000 hours for WV ⦠100V) at 105â.
Capacitance change
⦠±20% of the initial value
Dissipation factor(tanδ)
⦠200% of the specified value
Leakage current
⦠specified value
Shelf Life
The following requirements shall be satisfied when the capacitor are restored to 25â after exposing them for 1,000
hours at 105â without voltage applied.
Capacitance change
⦠±20% of the initial value
Dissipation factor(tanδ)
⦠200% of the specified value
Leakage current
⦠200% of the specified value
Others
Conforms to JIS-C-5101-4 (1998), characteristic W.
ïµ DIMENSIONS (mm)
Terminal Code : ND : Standard
Sleeve
Negative mark
Safety vent
L+2 Max
4.0¡ Ã0.5
+
-
PC board Pin-out
2- 2
Terminal Code :K6 (ø35)
Sleeve
Vent
L+2 Max
*A
6.3±1.0
PC board pin-out
60¡ã
60¡ã
B
*C
-
Terminal B=positive
4- 2
Terminal A&C=blank
ïµ PART NUMBERING SYSTEM( Example : 400V 330µF )
S P H 2 G 3 3 1 MND 3 0 4 5
Special Request
Size code(3045 : 30Ã45)
Terminal length code
Lead forming Type code
Capacitance tolerance code(M:±20%)
Capacitance code(330μF)
Voltage code(400V)
Series code (SPH)
|
▷ |