SPG2W471MND3550 Datasheet, PDF (1/3 Pages) Surge Components – Smaller size with higher ripple current

ALUMINUM ELECTROLYTIC CAPACITORS
SPG Series
 Smaller size with higher ripple current.
 Load life 5,000 hours at 105 ℃.
 SPECIFICATIONS
Item
Category Temperature Range
Working Voltage Range
Capacitance Range
Capacitance Tolerance
Dissipation Factor
(tanδ)
(at 25℃, 120Hz)
Rated Voltage (V)
tanδ(Max)
Performance Characteristics
-25 ~ +105℃
200 ~ 500Vdc
47 ~ 1,800μF
±20% (at 25℃ and 120Hz)
200 220 250 400 420 450 500
0.20 0.20 0.20 0.25 0.25 0.25 0.25
Leakage Current
I=0.02CV or 3000μA,whichever is smaller
I : Leakage current (μA) C : Rated capacitance (μF) V : Rated voltage (V)
Impress the rated voltage for 5 minutes.
Endurance
The following requirements shall be satisfied when the capacitor are restored to 25℃ after the rated voltage applied
for 5,000 hours at 105℃.
Capacitance change
≦ ±20% of the initial value
Dissipation factor(tanδ)
≦ 200% of the specified value
Leakage current
≦ specified value
Shelf Life
The following requirements shall be satisfied when the capacitor are restored to 25℃ after exposing them for 1,000
hours at 105℃ without voltage applied.
Capacitance change
≦ ±20% of the initial value
Dissipation factor(tanδ)
≦ 200% of the specified value
Leakage current
≦ 200% of the specified value
Others
 DIMENSIONS (mm)
Conforms to JIS-C-5101-4 (1998), characteristic W.
Terminal Code : ND : Standard
Sleeve
Negative mark
Safety vent
L+2 Max
4.0 ¡ À0.5
+
-
PC board Pin-out
10¡ _À0.5
2- 2
Terminal Code :K6 (ø35)
Sleeve
Vent
L+2 Max
*_A
6.3±1.0
PC board pin-out
60¡ã
60¡ã
B
*_C
-
Terminal B=positive
4- 2
Terminal A&C=blank
 PART NUMBERING SYSTEM( Example : 450V 470µF )
S P G 2 W4 7 1MND 3 5 5 0
Special Request
Size code(3550 : 35×50)
Terminal length code
Lead forming Type code
Capacitance tolerance code(M:±20%)
Capacitance code(470μF)
Voltage code(450V)
Series code (SPG)