|
SPD2W151MND2535 Datasheet, PDF (1/2 Pages) Surge Components – Smaller size with higher ripple current | |||
|
ALUMINUM ELECTROLYTIC CAPACITORS
SPD Series
ï¬ Smaller size with higher ripple current.
ï¬ Load life 3,000 hours at 105 â.
ï¬ Suitable for LCD and PDP.
T R O LY
ïµ SPECIFICATIONS
Item
Category Temperature Range
Working Voltage Range
Capacitance Range
Capacitance Tolerance
Performance Characteristics
-25 ~ +105â
400 ~ 450Vdc
82 ~ 330μF
±20% (at 25â and 120Hz)
Dissipation Factor
(tanδ)
(at 25â, 120Hz)
Rated Voltage (V)
tanδ(Max)
400
420
450
0.20
0.20
0.20
The above value should be increased by 0.02 for every additional 1000uF
Leakage Current
I=0.02CV or 3000μA,whichever is smaller
I : Leakage current (μA) C : Rated capacitance (μF) V : Rated voltage (V)
Impress the rated voltage for 5 minutes.
Endurance
The following requirements shall be satisfied when the capacitor are restored to 25â after the rated voltage applied
for 3,000 hours at 105â.
Capacitance change
⦠±20% of the initial value
Dissipation factor(tanδ)
⦠200% of the specified value
Leakage current
⦠specified value
Shelf Life
The following requirements shall be satisfied when the capacitor are restored to 25â after exposing them for 1,000
hours at 105â without voltage applied.
Capacitance change
⦠±20% of the initial value
Dissipation factor(tanδ)
⦠200% of the specified value
Leakage current
⦠200% of the specified value
Others
ïµ DIMENSIONS (mm)
Conforms to JIS-C-5101-4 (1998), characteristic W.
Terminal Code : ND : Standard
Sleeve
Negative mark
Safety vent
L+2 Max
4.0¡ Ã0.5
+
-
PC board Pin-out
2- 2
Terminal Code :K6 (ø35)
Sleeve
Vent
L+2 Max
*A
6.3±1.0
PC board pin-out
60¡ã
60¡ã
B
*C
-
Terminal B=positive
4- 2
Terminal A&C=blank
ïµ PART NUMBERING SYSTEM( Example : 450V 150µF )
S P D 2 W1 5 1 MND 2 5 3 5
Special Request
Size code(2535 : 25Ã35)
Terminal length code
Lead forming Type code
Capacitance tolerance code(M:±20%)
Capacitance code(150μF)
Voltage code(450V)
Series code (SPD)
|
▷ |