SGV Datasheet, PDF (1/3 Pages) RUBYCON CORPORATION – MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
SGV Series
 High ripple current
 Load life 5,000 hours at 85 ℃
 SPECIFICATIONS
Item
Category Temperature Range
Working Voltage Range
Capacitance Range
Capacitance Tolerance
Performance Characteristics
-25 ~ +85℃
200 ~ 500Vdc
56 ~ 2200 μF
±20% (at 25℃ and 120Hz)
Dissipation Factor
(tanδ)
(at 25℃, 120Hz)
Leakage Current
Endurance
Rated Voltage (V)
200 ~ 450
500
tanδ(Max)
0.15
0.20
The above values should be increased by 0.02 for every additional 1000μF
I=0.02CV or 3000μA,whichever is smaller
I : Leakage current (μA) C : Rated capacitance (μF) V : Rated voltage (V)
Impress the rated voltage for 5 minutes.
The following requirements shall be satisfied when the capacitor are restored to 25℃ after the rated voltage applied for
5,000 hours at 85℃.
Capacitance change
≦ ±20% of the initial value
Dissipation factor(tanδ)
≦ 200% of the specified value
Leakage current
≦ specified value
Shelf Life
The following requirements shall be satisfied when the capacitor are restored to 25℃ after exposing
hours at 85℃ without voltage applied.
Capacitance change
≦ ±20% of the initial value
Dissipation factor(tanδ)
≦ 200% of the specified value
Leakage current
≦ 200% of the specified value
them for 1,000
Others
 DIMENSIONS (mm)
Conforms to JIS-C-5101-4 (1998), characteristic W.
Terminal Code : ND : Standard
Sleeve
Negative mark
Safety vent
L+2 Max
4.0 ¡ À0.5
+
-
PC board Pin-out
10¡ _À0.5
2- 2
Terminal Code :K6 (ø35)
Sleeve
Vent
L+2 Max
*_A
6.3±1.0
PC board pin-out
60¡ã
60¡ã
B
*_C
-
Terminal B=positive
4- 2
Terminal A&C=blank
 PART NUMBERING SYSTEM( Example : 420V 560µF )
S G V 2 S 5 6 1 MND 3 5 5 0
Special Request
Size code(3550 : 35×50)
Terminal length code
Lead forming Type code
Capacitance tolerance code(M:±20%)
Capacitance code(560μF)
Voltage code(420V)
Series code (SGV)