W1210F500-RB-10 Datasheet, PDF (7/9 Pages) Superworld Electronics – WIREWOUND TYPE COMMON MODE FILTER

WIREWOUND TYPE COMMON MODE FILTER
W1210 SERIES
8. SOLDERING AND MOUNTING :
8-1. Soldering
Mildly activated rosin fluxes are preferred. Our terminations are suitable for all wave and re-flow soldering systems.
If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools.
8-1.1 Solder Re-flow :
Recommended temperature profiles for re-flow soldering in Figure 1.
8-1.2 Soldering Iron (Figure 2) :
Products attachment with soldering iron is discouraged due to the inherent process control limitations. In the event that
a soldering iron must be employed the following precautions are recommended.
Note :
a) Preheat circuit and products to 150° C.
b) 355° C tip temperature (max)
c) Never contact the ceramic with the iron tip
d) 1.0mm tip diameter (max)
e) Use a 20 watt soldering iron with tip diameter of 1.0mm
f) Limit soldering time to 4-5 secs.
P reheating
TP(26 0° C/40 s max.)
S oldering
20~40s
Natural
c ooling
217
200
150
60~150s
60~180s
4 80s max.
25
Time(sec.)
Figure 1. Re-flow Soldering : 3 times max.
P reheating
350
S oldering
within 4~5s
Natural
c ooling
150
O ve r 1min.
G rad ual
Cooling
Figure 2. Iron Soldering times: 1 times max.
NOTE : Specifications subject to change without notice. Please check our website for latest information.
20.05.2014
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 7