PDC0504 Datasheet, PDF (5/5 Pages) Superworld Electronics – SMD POWER INDUCTORS

SMD POWER INDUCTORS
9. RELIABILTY AND TEST CONDITION :
TEST ITEM
SPECIFICATION
SOLDERABILITY
MORE THAN 90% OF THE
TERMINAL ELECTRODE
SHALL BE COVERED
WITH FRESH SOLDER.
THERMAL SHOCK
TEST
( TEMP. CYCLE )
INDUCTANCE SHALL
NOT CHANGE MORE
THAN ±20%
HUMIDITY
RESISTANCE TEST
HIGH TEMP.
RESISTANCE TEST
PDC0504 SERIES
TEST CONDITION
PREHEAT : 125±25°C FOR 60 SECONDS
SOLDER : 99%Sn/0.3%Ag/0.7%Cu or equivalent
SOLDER TEMP. : 245±5°C
FLUX : ROSIN
DIP TIME : 4±1 SECONDS
ROOM TEMP.
15 MINUTES
-25±2°C
30 MINUTES
ROOM TEMP.
15 MINUTES
TOTAL : 50 CYCLES
85±2°C
30 MINUTES
TEMPERATURE : 40±2°C
HUMIDITY : 90 ~ 95%
APPLIED CURRENT : PER SPEC.
TIME : 500 HOURS
TEMPERATURE : 85±2°C
APPLIED CURRENT : PER SPEC.
TIME : 500 HOURS
10. UL CARD :
GUANGDONG CHINA
Mtl Dsg
Coating Type
BC
TC
__
__
__
ANSI
Type
TI
__
NOTE : Specifications subject to change without notice. Please check our website for latest information.
01.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 5