WAQ7F110-RB-10 Datasheet, PDF (3/7 Pages) Superworld Electronics – Wirewound Type Common Mode Filter (RoHS Compliant)

Wirewound Type Common Mode Filter (RoHS Compliant)
WAQ7F SERIES
8. RELIABILITY & TEST CONDITION :
ITEM
PERFORMANCE
Electrical Characteristics Test
Z (common mode)
DCR
I.R.
Temperature Rise Test
Mechanical Performance Test
Refer to standard electrical characteristics list
Rated Current < 1A ΔT 20°CMax
Rated Current ≧ 1A ΔT 40°CMax
Solderability Test
More than 90% of termincal electrode should
be covered with solder.
TEST CONDITION
Agilent-4291A+ Agilent -16197A
Agilent-4338B
Agilent4339
1. Applied the allowed DC current.
2. Temperature measured by digital surface thermometer.
Preheat: 150℃,60sec.。
Solder: Sn99.5%-Cu0. 5%。
Temperature: 245±5℃。
Flux for lead free: Rosin. 9.5%。
Dip time: 4±1sec。
Depth: completely cover the termination
Solder Heat Resistance
Terminal Strength
Appearance：No damage.
Inductance：within±10% of initial value
RDC：within ±15% of initial value and shall not
exceed the specification value
Solder tamperature: 260± 5° C
Temperature ramp/immersion and immersion
rate: 25± 6 mm/s
Dip time: 10± 1sec.
Number of heat cycles:1
Depth: completely cover the termination.
Preconditioning : Run through IR reflow for 2 times.
( IPC/JEDEC J-STD-020D Classification Reflow Profiles)
With the component mounted on a PCB with the device
to be tested, apply a force (>0805:1kg , <=0805:0.5kg)to
the side of a device being tested. This force shall be
applied for 60 +1 seconds. Also the force shall be applied
gradually as not to apply a shock to the component being
tes ted.
NOTE : Specifications subject to change without notice. Please check our website for latest information.
SUPERWORLD ELECTRONICS (S)
APPROVED
ENGINEERING
01.04.2015
01 APR 2015
PTE LTD
CONTROLLED COPPGY. 3