SLT171445G241P7B8 Datasheet, PDF (3/5 Pages) Superworld Electronics – LAN Transformer

LAN Transformer – SLT171445G241P7B8
P3
7. Soldering:
Mildly activated rosin fluxes are preferred. Our terminations are suitable for all re-flow soldering systems. If
hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools.
7-1 Solder Re-flow:
Recommended temperature profiles for re-flow soldering in Figure 1.
7-2 Soldering Iron (Figure 2):
Products attachment with soldering iron is discouraged due to the inherent process control limitations.
In the event that a soldering iron must be employed the following precautions are recommended.
Note :
a) Preheat circuit and products to 150°C.
b) 355°C tip temperature (Max.)
c) 1.0mm tip diameter (Max.)
d) Use a 20 watt soldering iron with tip diameter of 1.0mm
e) Limit soldering time to 4~5 secs.
Proprietary and Confidential
Document of Superworld
08/04/2016