PIF0503AR15MN Datasheet, PDF (2/7 Pages) Superworld Electronics – High Current Power Inductor

High Current Power Inductor– PIF0503A Series
P2
3. Schematic:
4. Material List:
(a) Core
(b) Wire
(c) Solder
(d) Ink
5. General Specification:
(a) Test Freq. : L : 100KHz/0.1V
(b) Operating Temp. : -40°C to +125°C (including self-temperature rise)
(c) Storage Temp. : -40°C to +125°C (on board)
(d) Humidity Range : 85 ± 2% RH
(e) Heat Rated Current (Irms) will cause the coil temperature rise approximately ∆t of 40°C (keep 1min)
(f) Saturation Current (Isat Typ.) will cause L0 to drop approximately 30%.
(g) Part Temperature (Ambient+Temp. Rise) : Should not exceed 125°C under worst case operating conditions.
(h) Storage condition (component in its packaging)
i) Temperature: Less than 40°C
ii)Humidity : 60% RH
Proprietary and Confidential
Document of Superworld
18/07/2016