W005 Datasheet, PDF (1/2 Pages) Surge Components – Single Phase 1.5 AMPS. Silicon Bridge Rectifiers

Suntan® Su®
W005 THRU W10
Single Phase 1.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts
Current 1.0 Amperes
FEAT U R E S
◆Ideal for printed circuit board
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
260℃ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
◆UL Recognized File number: E347215
WOB
Mechanical Data
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20%
Type Number
W005 W01 W02 W04 W06 W08 W10 UNITS
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
V_RRM
50
100 200 400 600 800 1000
V
V_RMS
35
70 140 280 420 560 700
V
V_DC
50
100 200 400 600 800 1000
V
Maximum Average Forward Rectified Current
I(AV)
1.0
A
@T_A = 50℃
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
30
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage @ 1.0A
V_F
Maximum DC Reverse Current @ TA=25℃
I_R
Rated DC Blocking voltage per leg TA = 125℃
1.0
V
10
μA
500
Typical Thermal Resistance (Note)
Rθ_JA
Rθ_JL
36
℃/W
13
Operating Temperature Range
T_J
-55 to +150
℃
Storage Temperature Range
T_STG
-55 to +150
℃
Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.with 0.47×0.47”(12×12mm) Copper
Pads.