TSL-0603UY000MTH Datasheet, PDF (1/3 Pages) Suntan Capacitors – Reflow Solderable

SMD TYPE LED
TSL-0603UY000MTH
Suntan®
FEAT U R E S
APPLI CAT I O N S
‧ Wide Viewing Angle 120^o
‧ Optical indicator
‧ Reflow Solderable
‧ Indoor display
‧ High Luminous Intensity and Low Power Dissipation
‧ Backlighting in dashboard and switch
‧ Good Reliability and Long Life
‧ Flat Backlighting for LCD, symbol and display
‧ Complied With RoHS Directive
‧ General use
TECHNICAL DATA SHEET
This product is generally used as indicator and luminary for electronic equipment such as household appliance, communication
equipment and dashboard.
Notes:
1. All dimension units are millimeters.
2. All dimension tolerance is ±0.2mm unless otherwise noted.
Selection Guide
Dice
Lens Type
Luminous intensity (mcd) @ 20mA
Min
Typ
Yellow
(AIGaInP)
Water Clear
50
100
Note:
1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. The above luminous intensity measurement allowance tolerance ±10%
Electrical / Optical Characteristics at Ta=25℃
Parameter
Symbol
Min.
Typ.
Max
Forward Voltage
VF
1.8
2.0
2.4
Reverse Current
IR
--
--
10
Dominate Wavelength
λd
585
--
596
Absolute Maximum Ratings at Ta=25℃
Parameter
Symbol
Power Dissipation
Pd
DC Forward Current
IF
Peak Forward Current 【1】
IFP
Reverse Voltage
VR
Electrostatic Discharge (HBM)
ESD
Operating Temperature
Topr
Storage Temperature
Tstg
Note:
1. 1/10 Dut cycle, 0.1ms pulse width.
2. The above forward voltage measure ment allowance tolerance ±0.1V.
Rating
100
25
100
5
±2000
-30~+85
-40~+100
Max
160
Units
V
uA
nm
Viewing Angle
2Ø1/2
120
Test conditions
IF=20mA
VR=5V
IF=20mA
Units
mW
mA
mA
V
V
℃
℃
Suntan_® Technology Company Limited Website: www.suntan.com.hk Email: [e-mail] Tel: [phone] Fax: [phone]