TS13DI-CD286 Datasheet, PDF (1/6 Pages) Suntan Capacitors – ALUMINUM ELECTROLYTIC CAPACITOR

ALUMINUM ELECTROLYTIC CAPACITOR
105℃, EXTRA LOW IMPEDANCE
Suntan®
FEAT U R E S
TS13D CD286 ‧ Load life of 2000 hours at 105℃
‧ Switch power supply
 Specifications
ITEMS
Operating Temperature Range(℃)
Rated Voltage Range (V)
Capacitance Range (μF)
Capacitance Tolerance(25℃, 120Hz)
Leakage Current(μA)
PERFORMANCE CHARACTERISTICS
-55~+105
6.3~100
0.47~15000
±20%
1=0.02CV or 3 whichever is greater (at 25℃, after 2 minutes)
C: Nominal Capacitance (μF) V: Rated Voltage (V)
Dissipation Factor(25℃, 120Hz)
Characteristics of Low Temperature
Rate Voltage
6.3
10
16
25
35
50
63
100
Tan δ
0.22
0.19
0.16
0.14
0.12
0.10
0.09
0.08
Add 0.02 per 1000μF or move.
Impedance at -10℃, 100KHz<200% of initial specified value at +20℃, 100KHz (Impedance ratio at 100KHz)
Load Life (+105℃)
After life test at condition stated in the table below, the capacitors shall meet the following requirement.
Case Dia
Test time (hrs)
ΦD≤8
1000
ΦD>8
2000
Ripple current applied
Leakage Current
Capacitance Change
Dissipation Factor
Not more than the specified value.
Within±20% of the initial value
Not more than 200% of the specified value.
Shelf Life (+105℃)
1000 hours. No voltage applied. After test:U_R to be applied for 30 minutes, 24 to 48 hours before measurement.
 Dimensions
mm
 Multiplier for ripple current
Frequency coefficient
ΦD 5 6.3 8 10 12.5 16 18
F 2.0 2.5 3.5
5.0
7.5
Φd 0.5
0.6
0.8
a
1.0
2.0
Freq(Hz
)
120
1K
10K
Cap(μF)
0.47~4.7
0.40
0.68
0.78
5.6~47
0.50
0.76
0.87
56~270
0.70
0.85
0.90
330~1000
0.80
0.93
0.98
1200~15000
0.90
0.95
1.0
Temperature coefficient
Temperature
+70
+85
Factor
1.96
1.68
100K
1.0
1.0
1.0
1.0
1.0
+105
1.0