TS13C8 Datasheet, PDF (1/3 Pages) Suntan Capacitors – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
Suntan®
CHIP TYPE SERIES
TS13C8
FEAT U R E S
‧ High temperature up to +125℃
‧ Load life from 1000 hours to 5000 hours
‧ Lead-free reflow soldering is available subject to customers’ request.
High Reliability 125℃ and 5000 hours
Suitable for Automotive Equipment
Specifications
ITEMS
Operating Temperature
Range
Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
Tan δ
PERFORMANCE CHARACTERISTICS
-40℃ ~ +125℃
10~450V
3.3~2200μF
±20% at 120Hz, 20℃
For 10V~100V, After 2 minutes’ application of rated voltage, leakage current is not more than 0.03CV or 4μA, whichever is greater.
For 160~450V, After 1 minutes’ application of rated voltage, leakage current is not more than 0.04CV or 100μA
Measurement frequency : 120Hz, Temperature : 20℃
Rated voltage (V)
10 16 25 35 50 63 100 160~250 400,450
Tan δ (MAX) Ø6.3~Ø10 0.24 0.20 0.16 0.14 0.14 0.18 0.18
-
-
Ø12.5~Ø16 0.22 0.18 0.16 0.14 0.12 0.14 0.10 0.20
0.24
Stability at
Low Temperature
Load Life
Self Life
Resistance to Soldering
Heat
Applicable Standards
Chip type
Measurement frequency : 120Hz
Rated voltage (V)
10 16 25 35 50 63 100 160~250 400,450
Impedance ratio
Ø6.3~Ø10
Z-25℃ / Z+20℃ 4
Z-40℃ / Z+20℃ 10
3
8
2
6
2
4
22
44
2
4
-
-
-
-
ZT / Z20 (MAX)
Ø12.5~Ø16
Z-25℃ / Z+20℃
Z-40℃ / Z+20℃
4
8
3
6
2
4
2
3
22
33
2
3
3
6
6
10
After 5000 hours’ application of rated voltage for
Ø12.5~16(10~100V),and 2000 hours for Ø8*10.5~
Ø10(10~100V), and 1000 hours for Ø8*6.2~ Ø6.3,as well
2000 hours application of rated voltage for Ø12.5~
Ø16(160~450V) at 125℃ capacitors meet the characteristics
Capacitance Change
Leakage Current
Tan δ
Within ± 30% of initial value
Initial specified value or less
300% or less of initial specified value
requirements listed at right
After leaving capacitors under no load at 105℃ for 1000 hours, they meet the specified value for load life characteristics listed above.
After reflow soldering according and restored
at room temperature, they meet the
characteristics requirements listed at right.
Capacitance Change
Tan δ
Leakage Current
Within ± 10% of initial value
Initial specified value or less
Initial specified value or less
JIS C-5141 and JIS C-5102
*1 [L±0.5] is applicable to Φ8×10.5～Ф10;
*2 [L±1.0] is applicable to Φ12.5～Ф16.
Re: Date code and series type — 1^st digit for Year; 2^nd digit for Quarter, 4 quarter codes in one year are 1, 4, 7, O;
3^rd character for Series; KH Series = H.
Suntan_® Technology Company Limited Website: www.suntan.com.hk Email: [e-mail] Tel: [phone] Fax: [phone]