TS13C7 Datasheet, PDF (1/3 Pages) Suntan Capacitors – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
Suntan®
CHIP TYPE SERIES
TS13C7
FEAT U R E S
‧ Load life of 3000~5000 hours with temperature up to 105℃
‧ Lead-free reflow soldering is available subject to customers’ request.
3000~5000 Hours Load Life
‹ Specifications
ITEMS
Operating Temperature Range
Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
Tan δ
PERFORMANCE CHARACTERISTICS
-55℃ ~ +105℃
6.3~100V
0.1~4700μF
±20% at 120Hz, 20℃
For Ø4~Ø10, After 2 minutes’ application of rated voltage, leakage current is not more than 0.01CV or 3μA, whichever is greater.
For Ø12.5~Ø16, After 1 minutes’ application of rated voltage, leakage current is not more than 0.03CV or 4μA, whichever is greater.
Measurement frequency : 120Hz, Temperature : 20℃
Rated voltage (V)
6.3
10
16
25
35
50
63
100
Tan δ (MAX)
Ø4~Ø10
0.28
0.24
0.20
0.16
0.13
0.12
0.12
0.12
Ø12.5~Ø16
0.38
0.34
0.30
0.26
0.22
0.18
0.18
0.18
Stability at Low Temperature
Load Life
Self Life
Resistance to Soldering Heat
Applicable Standards
‹ Chip type
Measurement frequency : 120Hz
Rated voltage (V)
Impedance ratio
ZT / Z20 (MAX)
Ø4~Ø10
Ø12.5~Ø16
Z-25℃ / Z+20℃
Z-40℃ / Z+20℃
Z-25℃ / Z+20℃
Z-40℃ / Z+20℃
6.3 10 16 25 35 50 63 100
4
322222
2
10 7 5 3 3 3 3
3
5
432222
2
12 10 8 5 4 3 3
3
After 5000 hours’( 3000 hours for Ø4~
Ø6.3 and Ø 8*6.2) application of rated
voltage at 105℃ capacitors meet the
Capacitance Change
Leakage Current
Within ± 30% of initial value
Initial specified value or less
characteristics requirements listed at
Tan δ
300% or less of initial specified value
right
After leaving capacitors under no load at 105℃ for 1000 hours, they meet the specified value for load life characteristics listed above.
After reflow soldering according and restored at
room temperature, they meet the characteristics
requirements listed at right.
Capacitance Change
Tan δ
Leakage Current
Within ± 10% of initial value
Initial specified value or less
Initial specified value or less
JIS C-5141 and JIS C-5102
*1 Voltage mark [6V] represents 6.3V for Ф4～Ф10; *2 [L±0.5] is applicable to Φ8×10.5～Ф10; *3 [L±1.0] is applicable to Φ12.5～Ф16.
Re: Date code and series type — 1^st digit for Year; 2^nd digit for Quarter, 4 quarter codes in one year are 1, 4, 7, O;
3^rd character for Series; KL Series = K.
Suntan_® Technology Company Limited Website: www.suntan.com.hk Email: [e-mail] Tel: [phone] Fax: [phone]