TS13C1 Datasheet, PDF (1/3 Pages) Suntan Capacitors – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
Suntan®
CHIP TYPE SERIES
TS13C1
FEAT U R E S
‧ Temperature up to +105℃ with load life of 1000~2000 hours.
‧ Lead-free reflow soldering is available subject to customers’ request.
Wide Temperature Series
‹ Specifications
ITEMS
Operating Temperature Range
Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
Tan δ
PERFORMANCE CHARACTERISTICS
-55℃ ~ +105℃
4~100V
0.1~10000μF
±20% at 120Hz, 20℃
Leakage current(φ4~φ10)≤0.01CV or 3μA,, whichever is greater.( After 2 minutes’ application of rated voltage)
Leakage current(φ12.5~φ16)≤0.03CV or 4μA,, whichever is greater.( After 1 minutes’ application of rated voltage)
Measurement frequency : 120Hz, Temperature : 20℃
Rated voltage (V)
4 6.3 10 16 25 35 50 63 100
Tan δ (MAX) φ4~φ10
0.35 0.26 0.20 0.16 0.14 0.12 0.12 0.12 0.12
φ12.5~φ16 0.42 0.38 0.34 0.30 0.26 0.22 0.18 0.14 0.12
Stability at Low Temperature
Measurement frequency : 120Hz
Rated voltage (V)
4
6.3 10
16
25
35
Impedance
ratio
φ4~φ10
Z-25℃ / Z+20℃
7
4
Z-40℃ / Z+20℃
15
8
3
6
2
4
2
4
2
3
ZT / Z20
(MAX)
φ12.5~φ16
Z-25℃ / Z+20℃
Z-40℃ / Z+20℃
7
17
5
12
4
10
3
8
2
5
2
4
50~100
3
4
2
3
Load Life
Self Life
Resistance to Soldering Heat
Applicable Standards
‹ Chip type
After 1000 hours’ application of
rated voltage at 105℃, capacitors
meet the characteristics
requirements listed at right
Capacitance Change
Leakage Current
Tan δ
Within ± 20% of initial value for capacitors of 25V or more
Within ± 25% of initial value for capacitors of 16V or less
Initial specified value or less
200% or less of initial specified value
After leaving capacitors under no load at 105℃ for 1000 hours, they meet the specified value for load life characteristics listed
above.
After reflow soldering according and restored at
room temperature, they meet the characteristics
requirements listed at right.
Capacitance Change
Tan δ
Leakage Current
Within ± 10% of initial value
Initial specified value or less
Initial specified value or less
JIS C-5141 and JIS C-5102.
*1 Voltage mark [6V] represents 6.3V for Ф4～
Ф10;
*2 [L±0.3] is applicable to Φ6.3×7.7 and Φ
8×6.2;
*3 [L±0.5] is applicable to Φ8×10.5～Ф10;
*4 [L±1.0] is applicable to Φ12.5～Ф16.
Re: Date code and series type — 1^st digit for
Year;
2^nd digit for Quarter, 4 quarter codes in one year
are 1, 4, 7, O;
3^rd character for Series; HT Series = T
Suntan_® Technology Company Limited
ØDxL
A
B
C
E±0.2
L
4x5.4
1.8
4.3
4.3
1.0
5.4
5x5.4
2.1
5.3
5.3
1.3
5.4
6.3x5.4
2.4
6.6
6.6
2.2
5.4
8x6.2
3.3
8.3
8.3
2.2
6.2
6.3x7.7
2.4
6.6
6.6
2.2
7.7
8x10.5
2.9
8.3
8.3
3.1
10.5
Website: www.suntan.com.hk Email: [e-mail]
10x10.5
3.2
10.3
10.3
4.5
10.5
10x135
3.2
10.3
10.3
4.4
13.5
(mm)
12.5x13.5 12.5x16
4.7
4.7
13.0
13.0
13.0
13.0
4.4
4.4
13.5
16.0
16x16.5/21.5
5.5
17.0
17.0
6.7
16.5/21.5
Tel: [phone] Fax: [phone]