TS13C0 Datasheet, PDF (1/2 Pages) Suntan Capacitors – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
Suntan®
CHIP TYPE SERIES
TS13C0
FEAT U R E S
‧ Designed for surface mounting on high density circuit board.
‧ Emboss carrier tape packing system is available for automatic insertion.
Standard Series
‹ Specifications
ITEMS
Operating Temperature Range
Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
Tan δ
PERFORMANCE CHARACTERISTICS
-40℃ ~ +85℃
4~100V
0.1~10000μF
±20% at 120Hz, 20℃
Leakage current(φ4~φ10)≤0.01CV or 3μA,, whichever is greater.( After 2 minutes’ application of rated voltage)
Leakage current(φ12.5~φ16)≤0.03CV or 4μA,, whichever is greater.( After 1 minutes’ application of rated voltage)
Measurement frequency : 120Hz, Temperature : 20℃
Rated voltage (V)
4 6.3 10 16 25 35 50 63 100
Tan δ (MAX) φ4~φ10
0.35 0.26 0.20 0.16 0.14 0.12 0.12 0.10 0.10
φ12.5~φ16 0.42 0.38 0.34 0.30 0.26 0.22 0.18 0.14 0.10
Stability at Low Temperature
Measurement frequency : 120Hz
Rated voltage (V)
4 6.3 10 16 25 35 50~100
Impedance ratio
φ4~φ10
Z-25℃ / Z+20℃ 7 4
Z-40℃ / Z+20℃ 15 8
322 2
644 3
2
3
ZT / Z20 (MAX)
φ12.5~φ16
Z-25℃ / Z+20℃
Z-40℃ / Z+20℃
7
17
5
12
4
10
3
8
2
5
2
4
2
3
Load Life
Self Life
Resistance to Soldering Heat
Applicable Standards
‹ Chip type
After 2000 hours’ application of
rated voltage at 85℃, capacitors
meet the characteristics
requirements listed at right
Capacitance Change
Tan δ
Leakage Current
Within ± 20% of initial value
(Within ± 25% of initial value for 4V)
200% or less of initial specified value
Initial specified value or less
After leaving capacitors under no load at 85℃ for 1000 hours, they meet the specified value for load life characteristics listed above.
The capacitors shall be kept on the hot plate
maintained at 250℃ for 30 seconds. After
Capacitance Change
Within ± 10% of initial value
removing from the hot plate and restored at
Tan δ
Initial specified value or less
room temperature, they meet the characteristics Leakage Current
Initial specified value or less
requirements listed at right.
JIS C-5141 and JIS C-5102.
1 Voltage mark [6V] represents 6.3V for Ф4～Ф10;
*2 [L±0.3] is applicable to Φ6.3×7.7 and Φ8×6.2;
*3 [L±0.5] is applicable to Φ8×10.5～Ф10;
*4 [L±1.0] is applicable to Φ12.5～Ф16.
Re: Date code and series type — 1^st digit for Year;
2^nd digit for Quarter, 4 quarter codes in one year are 1, 4, 7, O;
3^rd character for Series; SS Series = S
Suntan_® Technology Company Limited
ØDxL
A
B
C
E±0.2
L
4x5.4
1.8
4.3
4.3
1.0
5.4
5x5.4
2.1
5.3
5.3
1.3
5.4
6.3x5.4
2.4
6.6
6.6
2.2
5.4
8x6.2
3.3
8.3
8.3
2.2
6.2
6.3x7.7
2.4
6.6
6.6
2.2
7.7
8x10.5
2.9
8.3
8.3
3.1
10.5
10x10.5/13.5
3.2
10.3
10.3
4.4
10.5/13.5
12.5x13.5
4.7
13.0
13.0
4.4
13.5
(mm)
12.5x16
4.7
13.0
13.0
4.4
16.0
16x16.5/21.5
5.5
17.0
17.0
6.7
16.5/21.5
Website: www.suntan.com.hk Email: [e-mail] Tel: [phone] Fax: [phone]